fireberd Posted August 3, 2013 Share Posted August 3, 2013 I'm trying to set up a new HD Desktop, similar to how I have a POD X3 setup with effects only. I programmed one user location with Delay and Reverb only, as I have it setup in the X3, but there is no effects when I try it with my Pedal Steel Guitar. Can I set it this way or do I have to have an amp in the chain? I plan to set up some tones with amps in them later, but want the "no amp/effects only" if it can be done. Quote Link to comment Share on other sites More sharing options...
silverhead Posted August 3, 2013 Share Posted August 3, 2013 Yes it can be done - it should work with no amp assigned in the chain. Check your Inputs assignment - make sure that you select the physical input into which your guitar is plugged. Quote Link to comment Share on other sites More sharing options...
fireberd Posted August 3, 2013 Author Share Posted August 3, 2013 According to the HD Edit, "Guitar" is set as the input. I'd post a screen shot but I can't figure out how to do it on this forum. Quote Link to comment Share on other sites More sharing options...
fireberd Posted August 3, 2013 Author Share Posted August 3, 2013 OK, I figured it out. The Mixer Left/Right controls had to be set to "0". The default is 100% Left and 100% Right. (I only use one output - Left). Now to get the reverb set to what I want, the settings are different in the HD, as I used the "lux Reverb" in the X3 and that is not one of the options. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.