JeremiahEdward Posted June 12, 2016 Share Posted June 12, 2016 Does anyone else have the issue of the dim bypassed lights not working? For instance, when there is a delay assigned to a footswitch, it is brightly lit green when active, and dimly lit green when bypassed. My unit does not show any colored lights when bypassed. Only when engaged. So I have no idea what each footswitch does until I turn it on. If I engage that same footswitch, some fo the others light up (dimly) and varying colors... for instance, a few footswitches away from it will flash dimly red, then blue, then yellow etc. if I keep pressing any other switches (but they don't stay lit). A reset helped briefly, but it eventually display's the same behavior. I am running Firmware 2.00. Quote Link to comment Share on other sites More sharing options...
Kiari Posted August 17, 2016 Share Posted August 17, 2016 That is a setup matter. Go to setup (not scene setup) by pressing the switch "hold for setup" - at the bottom right from the right display, set "dim on". I strongly recomend to update the firmware to the 2.04 version. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.