bc05 Posted August 21, 2016 Share Posted August 21, 2016 Hi guys I was wondering how I would go about running two acoustic guitars - one plugged into Guitar In and one into Aux 1, and a vocal (Mic) - recording all three DRY but monitored in real time? I got it going but could only monitor one acoustic, and I had no control over the levels of anything but the Mic - meaning the signal was VERY low going in. Any best practice for this? Seems when I set the Output to MULTI ( meaning I can hear what Im recording) I cant have that guitar go to USB 3/4 for example as MULTI is only set to USB 1/2? Im confused... Quote Link to comment Share on other sites More sharing options...
shanecgriffo Posted August 22, 2016 Share Posted August 22, 2016 i'm just beginning to use helix for recording, one thing i did find was that there is a mic input level control in the general settings that can be raised. 👠Quote Link to comment Share on other sites More sharing options...
shanecgriffo Posted August 22, 2016 Share Posted August 22, 2016 btw-you do need insert a return block onto your signal path, in case you didn't do that .. for the guitar going into the return Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.