jaavajaava Posted April 17, 2017 Share Posted April 17, 2017 I recently got a firehawk fx and i am generally happy with it, especially with the iOS editor. However there is a slight problem that i would like someone try to reproduce (so that i know i am not imagining things). I was trying to recreate Brian May's tone for a Queen cover project so I went with AC30 fawn with full gain and a Boost+EQ with full gain in front of it. The result is actually good. However i found out that if the combined gain settings of the booster and the amp are too high there are weird fluctuations on the output volume and even very short dropouts. These seem to be especially audible in some cases, notably when playing long high notes (which is a big deal when playing queen). I also tried using some overdrive models as a booster and got the same behavior, Do others have this same behavior? Quote Link to comment Share on other sites More sharing options...
artimezzi97 Posted January 4, 2018 Share Posted January 4, 2018 Hi, i've got a similar problemi today with my band. When i was playing my personal patch high gain (treadplate with comp and stomp) volume drops sometimes, in the worst case the sound was very slow and fuzzy for a lot of time. I don't know why Quote Link to comment Share on other sites More sharing options...
twango60 Posted January 15, 2018 Share Posted January 15, 2018 edpending on settings niose gate can cause vol /signal dropouts especially on sustianed notes Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.