deadlychris114 Posted May 20, 2017 Share Posted May 20, 2017 So i had a problem. I had distortion sounds saved in my A,B,C,D channels and i used those for a while. Today i switched to some of the pre-made artist sounds while i was playing, just for test, and when i returned to my channel A saved sound, it had an increase in gain. Not only that, every other saved channel had a significant increase in gain. The amp was not in manual mode, i didn't even turn any knobs, just pressed the channel buttons. After i started tweaking the knobs, the issue remained, it was not a gain/ chorus effect and the gain issue remained even in my clean saved sound.Now i resolved this problem by doing a factory reset and re-building my sounds from scratch, which was no big deal but it was frustrating. What i would like to know is, was that an amp malfunction, or did i do something wrong? Again, the issue was not in manual mode, i was just changing effects from the arrow pad, and when i returned by pressing channel button A to my saved sound, then occured the increased gain problem, which remained throughout the rest of the sounds. The issue remained even after i started tweaking in manual mode.sorry for the long post and thanks in advance Quote Link to comment Share on other sites More sharing options...
fflbrgst Posted May 22, 2017 Share Posted May 22, 2017 Are you sure this was 'gain' and not just an increase in volume? The master volume setting is not saved with patches, only the channel volume. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.