john0255 Posted July 14, 2017 Share Posted July 14, 2017 The Helix has been such a great tool. I am just beginning to tap into how I can control other effects with it. My next quest is to use my Boss ME80 with the Helix. Can I simply cable it to guitar out or should I use Effects Loop for better results? Also, how would I connect any scenario? Thanks for your help!! Quote Link to comment Share on other sites More sharing options...
Digital_Igloo Posted July 14, 2017 Share Posted July 14, 2017 I might suggest this as the best way to connect your ME-80: Connect Helix's FX SEND 1 to the ME-80's GUITAR IN. Connect the ME-80's L/MONO OUT to Helix's FX RETURN 1. On Helix, set Global Settings > Ins/Outs > Send/Return 1 to "Instrument". It should be by default. On Helix, at the point in the signal flow where you want to insert the ME-80, add a Send/Return > Mono > FX Loop 1 block. From stomp footswitch mode, touch-hold a switch and then press Knob 6 (OK). This switch lets you instantly insert/remove your ME-80 from the signal flow. Quote Link to comment Share on other sites More sharing options...
john0255 Posted July 15, 2017 Author Share Posted July 15, 2017 Wow! You are great. Will give it a try and report back! Thanks for the help!!! Quote Link to comment Share on other sites More sharing options...
john0255 Posted July 15, 2017 Author Share Posted July 15, 2017 I hate tp be a bother, but is their an example of this: On Helix, at the point in the signal flow where you want to insert the ME-80, add a Send/Return > Mono > FX Loop 1 block. So my understanding is I can have the ME80 basically as a block inside any patch I like? Quote Link to comment Share on other sites More sharing options...
gbbaker Posted July 15, 2017 Share Posted July 15, 2017 I hate tp be a bother, but is their an example of this: On Helix, at the point in the signal flow where you want to insert the ME-80, add a Send/Return > Mono > FX Loop 1 block. So my understanding is I can have the ME80 basically as a block inside any patch I like? Yes - just remember that the location will effect the outcome of the sound i.e. pre-amp or post-amp. Also, note that the "mix" should be set to 100% if you want the effect(s) to be at full volume. And . . . think about putting the Snd/Return Block in Parallel with the rest of the tone path. i.e. Path A1 for most effects but the ME80 in Path A2 . Just some thoughts. There is no "right" way - just the right way for you! Blsssings, Bo Quote Link to comment Share on other sites More sharing options...
john0255 Posted July 15, 2017 Author Share Posted July 15, 2017 Thanks for the help, very cool! Gives me something to play around with!! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.