jm1681 Posted November 21, 2017 Share Posted November 21, 2017 I did a brief search, but didn't come up with any real results, though it seems like others are experiencing similar issues, with similar Line 6 devices. While playing bass through a patch I made on my Pod HD Desktop, I noticed as I was playing the tone, and volume of the patch was changing slightly, until the volume dropped out completely. I have an FBV Express II connected, but this occurs with no external influence. No tweaking of any of the knobs, or of the volume pedal. If I switch to another patch, then switch back, it goes back to normal, until it eventually changes and disappears again. Does anyone have any experience with this, and a potential remedy? I saw something about one user going into a "test" mode, and the problem didn't occur there. I don't want to alter any of the unit's functionality; I just want it to work right :/ Any help is greatly appreciated. Quote Link to comment Share on other sites More sharing options...
Triryche Posted November 21, 2017 Share Posted November 21, 2017 Is your firmware up to date? When the volume starts dropping does moving the channel or master volume bring it back? Quote Link to comment Share on other sites More sharing options...
jm1681 Posted November 21, 2017 Author Share Posted November 21, 2017 I'll check the firmware when I get home, but I believe it is current. I'll also check whether or not any change to the levels brings it back. Thank you for the suggestions, I'll report back in a few hours :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.