dfennessey1122 Posted March 14, 2018 Share Posted March 14, 2018 Hello everyone, I was wondering if anyone else is having trouble using the 1/4" outputs or SPDIF output to get L/R stereo effects output? My stereo effects work only they output in mono in both cases. There is no stereo separation between left and right channels....not sure what i am doing wrong here. Thanks.... Quote Link to comment Share on other sites More sharing options...
pilottes Posted March 15, 2018 Share Posted March 15, 2018 I mention it because it happened to me but make sure every block following your stereo effect is stereo. I had drop a simple volume pedal without paying attention and it was mono. I even used that patch as a template so I had to change quite a few.... Quote Link to comment Share on other sites More sharing options...
dfennessey1122 Posted March 16, 2018 Author Share Posted March 16, 2018 Thanks for the reply...i tried that...i made it as simple as just one stereo delay ping pong effect.....and i get mono out......what is up? Quote Link to comment Share on other sites More sharing options...
Doug6String Posted March 16, 2018 Share Posted March 16, 2018 I use 1/4 and spdif with no stereo issues (as I'm sure everyone will say). I'm using spdif now - I took a blank preset and did nothing except put a ping pong delay in it and it's stereo. I use the Helix Editor and the input and output are multi. Have you started from scratch like this to find the issue? I also use an audio interface and once my 1/4 inputs magically went from L and R to the middle and it took me a while to think of checking that. Quote Link to comment Share on other sites More sharing options...
dfennessey1122 Posted March 16, 2018 Author Share Posted March 16, 2018 Hello Doug6String....i did not try starting a new preset from scratch....i will do that tonight when i have time in the studio again....interesting that you saw this issue yourself in the past....did you figure out why it happened? I am running my Helix outputs into a Roland Octacapture audio interface. Quote Link to comment Share on other sites More sharing options...
dfennessey1122 Posted March 16, 2018 Author Share Posted March 16, 2018 Somehow problem solved.....i set up a new preset from scratch and all of a sudden the stereo effects were outputing in stereo.....i appreciate the tip. Thanks, Dan Quote Link to comment Share on other sites More sharing options...
Doug6String Posted March 17, 2018 Share Posted March 17, 2018 10 hours ago, dfennessey1122 said: Somehow problem solved.....i set up a new preset from scratch and all of a sudden the stereo effects were outputing in stereo.....i appreciate the tip. Thanks, Dan Hey Dan - awesome! Enjoy - Doug Quote Link to comment Share on other sites More sharing options...
VirtualGuitars Posted March 18, 2018 Share Posted March 18, 2018 Just remember that any blocks going before the amp/preamp blocks will be processed into a mono signal afterwards. In other words, you're wasting valuable DSP power on any stereo blocks before the amp/preamp blocks. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.