arch23 Posted March 17, 2018 Share Posted March 17, 2018 Hi, I have this weird foot switch problem - My stomps are set to show 4 patches at the top row and 4 snapshots at the bottom row. Every stop on footswitch 4 in the top row always switches to the assigned patch. In Stomp Footswitch Mode I usually assign the delay to foot switch number 4. Very often when I stomp footswitch 4 to activate to bypass the delay it does not work or switch momentarily until I lift my foot off. I have to stomp it several time to take effect and sometimes in does work in the first try. Again - this happens only in Stomp Footswitch Mode. Is it a faulty switch? Whats going on here? Thanks Ori Quote Link to comment Share on other sites More sharing options...
dizzyspiral Posted September 12, 2018 Share Posted September 12, 2018 I have the same problem in that switch!! And some times it happen me in tempo switch. i am in Mazatlan Mexico and i cant send it to United State to fix it. Quote Link to comment Share on other sites More sharing options...
Peter Posted September 17, 2018 Share Posted September 17, 2018 It's a contact problem in the switch. I had the same issue with another switch. I opened my Helix. There are little micro switches under the foot switches. I used a little bit contact cleaner spray on it. Now everything is fine. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.