tsig Posted September 13, 2018 Share Posted September 13, 2018 Anyone here have any experiencing using the Helix with the Orange Dark Terror, or any other heads in the Terror series? I'd like to be able to use the Helix and 4 cable method to create a clean channel on the Dark Terror. If anyone has tried this, I'd like to know how your experience went. Quote Link to comment Share on other sites More sharing options...
Thark Posted September 17, 2018 Share Posted September 17, 2018 Hi Tsig. I have an Orange. Tiny Terror which is probably very similar to the Dark Terror amp. Unfortunately, the 4cm requires an effects send/return loop on the amp, which my Tiny Terror doesn’t have. I would expect the same is the case with the Dark Terror as well. Quote Link to comment Share on other sites More sharing options...
DarthHollis Posted September 17, 2018 Share Posted September 17, 2018 The Dark Terror has an FX loop. Yes, you can use a clean preamp in the Helix and bypass the preamp in the Dark Terror. I did the same thing with the 5153 50 watt. You will have an FX loop that sends to the input of the amp and the FX send from the amp into the return of the Helix. When you are using the preamp in the Helix, just turn off the FX loop in the Helix and vice versa. Look at the set list made for templates and use the one for 4CM. Quote Link to comment Share on other sites More sharing options...
Thark Posted September 18, 2018 Share Posted September 18, 2018 Oops. My bad. The Dark Terror does have an effects loop. It should be straighforward to do a 4cm setup. Lots of info on the interweb about setup. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.