Saving L3t Speaker Modes With Pod Hd Pro Patches

[wicker_man]

I have a Pod HD Pro > L6 link > DT-25 head > L6 link > L3t.  Am I right to think that I should be able to save the speaker mode of the L3t per patch in the POD?  I've tried setting the required speaker mode then saving the patch, but if I then change speaker mode manually the L3 does not return to the 'saved' mode when I re-select the patch.  A I following the right procedure?

 

Firmware 2.20 on the POD, 1.03 on the L3t.

[pugdealer]

Maybe it only works if the L3t if 1st in the chain, right after the POD...

[wicker_man]

It certainly saves the speaker mode OK if the L3t is 1st in the chain.  Sadly, the POD doesn't recognise the DT25 at won't let me save the changes to the topology :angry: (or, presumably any other parameters that can't be set in the POD).  Seems like we've found out the reason why the manual says to always put the DT amp first in the chain...  What I don't know is whether this is something that can be fixed with another firmware update.

[AndyParedesMusic]

Hi Wickerman - I have noted this as well.  The documentation states we need to put the DT first in the chain to ensure the topologies are correctly controlled. I personally just leave the L-series in "full range" mode as I use it only for acoustic sounds rather than a stereo field.  May want to ping customer support directly to see if this is a supported use or needs to become a feature request.