lpaul626 Posted January 1, 2020 Share Posted January 1, 2020 Just upgraded my M9 and picked up an HX Stomp. I set up a basic patch with Chorus, reverb and delay to run through he clean channel on my Bogner XTC 20th. The only change I made to the default settings of the delay was to change the mix to 17%. While playing through the patch into the amp, I hear a clicking sound coming through the amp. Has anyone else experienced this? I tried the patch direct into a PA. I still hear the clicking although it’s not as pronounced. Thoughts? Quote Link to comment Share on other sites More sharing options...
phil_m Posted January 1, 2020 Share Posted January 1, 2020 What delay model are you using? Quote Link to comment Share on other sites More sharing options...
lpaul626 Posted January 1, 2020 Author Share Posted January 1, 2020 Vintage digital... also tried Simple as well. Quote Link to comment Share on other sites More sharing options...
phil_m Posted January 1, 2020 Share Posted January 1, 2020 1 hour ago, lpaul626 said: Vintage digital... also tried Simple as well. I suspected it was the Vintage Digital delay. If you have the Bit Depth parameter set to a lower value, you can induce digital clipping in the repeats, which would sound like clicking. You counteract that by turning up the Headroom parameter. Quote Link to comment Share on other sites More sharing options...
lpaul626 Posted January 1, 2020 Author Share Posted January 1, 2020 Thanks... it was definitely the model. I tried adjusting the parameters you mention with no luck. I went with another model. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.