jaroslawvenzke Posted April 6, 2020 Share Posted April 6, 2020 Hi all, i need your help with my FBV Express MkII Padel. I set my POD X3 Pro to Dual Tone and I want to run an electric guitar and a bass guitar in parallel. I want to use my FBV Express MkII to control only Tone 1, the electric guitar. I have set everything according to the instructions in the system in the "PEDAL" section. I have also locked the "Tone 2" section. Everything works perfectly. But only until I press a foot switch (A, B, C, or D) on the FBV Express MkII. Then the "CNTRL range" of "TONE 1 ONLY" in the system suddenly jumps to "BOTH TONES" and then the pedal also reacts in the Tone 2 range. How can I change this behavior so that the "Pedal" setting in the System section is always set to "TONE 1 ONLY", even when I press a footswitch on the pedal? Cheers, J.V. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.