iineviitable Posted February 11, 2014 Share Posted February 11, 2014 I have an AT2020 condensor microphone(48v Phantom Power.) And when i plug it into the interface (UX2) and try to use it in something like skype or POD Farm 2 there is no audio, and if i tap my Mic the needles don't move at all. Any help would be appreciated. Yes i have the drivers installed correctly Quote Link to comment Share on other sites More sharing options...
FlavioLol Posted February 11, 2014 Share Posted February 11, 2014 Have you selected the "Mic Imput 1 or 2"? I have the UX1, so I don't know how the UX2 works but I guess is quiet the same, Quote Link to comment Share on other sites More sharing options...
iineviitable Posted February 12, 2014 Author Share Posted February 12, 2014 Have you selected the "Mic Imput 1 or 2"? I have the UX1, so I don't know how the UX2 works but I guess is quiet the same, I dont know what you mean by that, i have the mic plugged into 1/L Picture of some settings: http://puu.sh/6SVUU.png Front of interface: http://puu.sh/6SW0A.jpg Nothing is plugged in the back of it. I did have headphones plugged into the monitor jack and heard nothing, and the headphones do work when plugged into my computer so its not them and the mic works in a different interface so its not the mic or xlr cable. If you need any other screen shots of settings please tell me. Edit: Just plugged in my guitar and it works flawlessly. But still not the mic. Doesnt make any sense to me. Quote Link to comment Share on other sites More sharing options...
dback Posted February 12, 2014 Share Posted February 12, 2014 I dont know what you mean by that, i have the mic plugged into 1/L Picture of some settings: http://puu.sh/6SVUU.png Front of interface: http://puu.sh/6SW0A.jpg Nothing is plugged in the back of it. I did have headphones plugged into the monitor jack and heard nothing, and the headphones do work when plugged into my computer so its not them and the mic works in a different interface so its not the mic or xlr cable. If you need any other screen shots of settings please tell me. Edit: Just plugged in my guitar and it works flawlessly. But still not the mic. Doesnt make any sense to me. I open up Pod Farm Stand-Alone, go to the mixer, and select the input drop-down menu. Then, select Mic 1 or Mic 2 depending on which XLR input I put the mic cable. See my pic for help.... Good luck! Dave www.facebook.com/doughnutblonde 2 Quote Link to comment Share on other sites More sharing options...
iineviitable Posted February 12, 2014 Author Share Posted February 12, 2014 I open up Pod Farm Stand-Alone, go to the mixer, and select the input drop-down menu. Then, select Mic 1 or Mic 2 depending on which XLR input I put the mic cable. See my pic for help.... Good luck! Dave www.facebook.com/doughnutblonde You are my hero. <3 Works perfectly now. I love you. Quote Link to comment Share on other sites More sharing options...
LawAngTee Posted January 3, 2015 Share Posted January 3, 2015 Hi there!How do I get my guit AND mic work at the same time? Which imput to choose for a guit and one mic?Thanx in advance, have a nice one, LawAngTee Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.