Hitperson Posted January 4, 2021 Share Posted January 4, 2021 Hey guys, i'm struggling to get any volume from the analogue outs on my UX2 I've recently upgraded from a UX1 which was providing the same issue. the UX2 is running with headphones from the Headphone out (with no issue) and the analogue outs are running to 2 separate guitar amps, i had no issue with this until i started using headphones and forgot to lower the ouput volume on the UX1 and blew one of the amps, since then the only volume i get from the analogue out is very low (on both the UX1 and UX2) with both the amp and output rolled from mix through to max. the remaining amp works fine when plugging the guitar directly into it so i'm not sure where the issue lies as i'd assumed that the amp that failed damaged my UX1 in some way when it blew. any info would be most welcome. Cheers, Stu Quote Link to comment Share on other sites More sharing options...
Hitperson Posted January 9, 2021 Author Share Posted January 9, 2021 To add further information to this, the volume output is fine when PODfarm 2 is not running... i'm currently re-installing all my line 6 software and drivers to see if this remedies the issue, Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.