DionRushe Posted May 7, 2021 Share Posted May 7, 2021 Hi guys I have posted on here before RE the Stomp working in conjunction with a GFI System Specular Tempus and the advice was super helpful. However, as a midi novice; I can't work out how to pull up a specific preset on my Tempus when I switch preset on my Stomp. The stomp will cycle through presets on the Tempus as I change patch - I just can't work out how to make it recall the specific preset I would like when I change patch on the Stomp. I have a feeling it's something very simple but I can't find much advice on how to configure it. Thanks in advance for the help! Quote Link to comment Share on other sites More sharing options...
rd2rk Posted May 8, 2021 Share Posted May 8, 2021 In Global Settings>MIDI disable PC TX. This prevents HXS from sending it's default PC#. In your Preset, go to Command Center. Set an Instant Command (the lightning bolts) to the PC# you want the Spec to switch to. Make sure it's either on the same channel as HXS (default Base Channel is 1) or in Command Center specify the MIDI Channel the Spec is on. If you want different Spec presets per Snapshot, SAVE the Snapshot, open the next Snapshot, Change the PC# and SAVE. Rinse and repeat. Don't forget to save the Preset on the Snapshot you want to be on when you load the Preset. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.