External Effect Pedal & Stomp XL

[Getauk]

Can anyone advise me on how best to integrate an external effects pedal (Danelectro Spring King Reverb) to use with my HX Stomp XL? 
 

It’s the only external pedal I’ll be using so not part of a pedalboard and I’m running the stomp into a FRFR Headrush 108 cab rather than a regular guitar amp. What cables will I need (TS or TRS - Y or 2 single cables)?

 

Sorry for my ineptitude but I struggled to find info online and I’m very new to multi-effects. Don’t want to purchase cables that aren’t correct. 

[rd2rk]

Assuming that this is a mono pedal, you need two 1/4" TS (instrument) cables. In your preset, place the FX Loop L Block wherever you want the Reverb. That's the TIP connector on the stereo SEND jack. That goes to the pedal INPUT. The pedal OUTPUT goes to the L/Mono RETURN.

 

OR you can simply place it between the HXS 1/4" L/Mono Out and the 108.

 

Whichever method is more convenient/sounds best.

[Getauk]

9 minutes ago, rd2rk said:

Assuming that this is a mono pedal, you need two 1/4" TS (instrument) cables. In your preset, place the FX Loop L Block wherever you want the Reverb. That's the TIP connector on the stereo SEND jack. That goes to the pedal INPUT. The pedal OUTPUT goes to the L/Mono RETURN.

 

OR you can simply place it between the HXS 1/4" L/Mono Out and the 108.

 

Whichever method is more convenient/sounds best.

That’s so helpful. Thanks very much for taking the time to reply.