dazr33 Posted November 28, 2021 Share Posted November 28, 2021 I've worked out I can split the signal chain so I have 2 amps running in parallel - but I cannot, for the life of me, workout how to assign a footswitch that can select between the 2 signal paths. I want to have a clean Amp in the top row, and a Gain Amp in the lower row and be able to push Footswitch 1 to be able to change between those 2 paths (i could do this easily on the boss gt1000 but the options on the split Y dot dont make sense to me). Any help to do this would be fantastic and I only use the L/mono output so I'd need them to be merging back in, in the centre or left. Quote Link to comment Share on other sites More sharing options...
rd2rk Posted November 28, 2021 Share Posted November 28, 2021 Change the split block type to A/B. Assign it's ROUTE TO parameter (it's only parameter) to a footswitch. In the Bypass/Controller Assign screen you'll see that the MIN/MAX settings have already been assigned MIN=A100; MAX=B100. If not, set them manually. Demo preset attached. dazr33.hlx Quote Link to comment Share on other sites More sharing options...
dazr33 Posted November 28, 2021 Author Share Posted November 28, 2021 Awesome thankyou!!, I also realized my stomp was in snapshot mode, which is why the footswitch wasnt changing between the 2 amps Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.