stevebaci27 Posted February 3, 2022 Share Posted February 3, 2022 Okay guys I have a fender blues Junior 15 watt amp that I would just like to run overdrive distortion NO Amp or Cab in front of My amp and run all Wet FX and Amp/Cab to FOH/FRFR/PA is this possible Blues jr does not have FX loop I went to the NAMM show in Anaheim in 2020 I went to Line 6 and they told me that the Pod Go could do this because it has Amp out and this was the furthest thing from the truth so before I purchase the Helix I would love some feedback thank You Quote Link to comment Share on other sites More sharing options...
rd2rk Posted February 3, 2022 Share Posted February 3, 2022 Guitar>Helix Guitar In>OD/Dist>FX Send 1 Block (to amp)>Helix Amp/Cab>Wet FX>XLR Out (to FOH) EZ PZ You can also do this with a Stomp, depending how many/how DSP intensive your Amp/Cab/FX needs. Quote Link to comment Share on other sites More sharing options...
stevebaci27 Posted February 3, 2022 Author Share Posted February 3, 2022 @rd2rkthank you So I could also do this with Stomp W/D/W Quote Link to comment Share on other sites More sharing options...
rd2rk Posted February 3, 2022 Share Posted February 3, 2022 42 minutes ago, stevebaci27 said: @rd2rkthank you So I could also do this with Stomp W/D/W Yes, you can do WDW with Stomp or Helix. The configurations would be diifferent: Guitar>HXS L/Mono In>OD/DIST>Split>Amp/Cab>Wet FX>Main L/R Outs to FOH > (some block (0db gain or effect) required to create the Split)>Send L/R (pull down MIX block to separate the Outputs, then TS cable = Left Send)>Amp Keep in mind that the signal chain I described for Helix is only one of many ways to go about it. 1 Quote Link to comment Share on other sites More sharing options...
stevebaci27 Posted February 4, 2022 Author Share Posted February 4, 2022 Thank You Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.