Help - possible to create switchable mono sends in HX Stomp from the L/R output jacks?

[iluvjazznjava]

Hello everyone,

After playing with HX Edit and searching the forums, I haven't managed to figure out my problem, but I feel it must possible ...

So right now I am using a Radial Bigshot ABY box which is fed a mono signal from the L output on the stomp.  The ABY lets me send the signal to both inputs on my amp and toggle between A and B (its a Matchless DC-30 clone with two channels and inputs for each channel).  The thing is, I feel like I should be able to ditch the ABY and achieve the same with just the stomp.  My effect/signal chain is mono all the way through the stomp, so what I want to accomplish is setting up a footswith that can either send the entire signal chain to the L output, or the entire signal to the R output (but not both simultaneously).  Another way to look at it is that I just want to make the L/R outputs on the Stomp essentially A/B mono outputs that are both fed the same source.  That way I could either select the A or  B channel on the amp by toggling between the L and R outputs on the Stomp.   Seems simple enough, but all my messing with panning blocks and trying to assign switches hasn't gotten me there.  Ideas?

[rd2rk]

Assign the PAN Parameter of the Output Block to a FS. By default when the FS is OFF the signal will pan LEFT; when it's ON it'll pan RIGHT.

[iluvjazznjava]

See, I knew it must be easy :-)  Couldn't wrap my head around it, too simple I guess :-)

 

Ok, tougher question - any way to do the same, but add a third mode where both output?  In other words, feed both channels of the amp the mono feed from the L/R output jacks simultaneously?  

[rd2rk]

Two modes = FS

Three modes = FS + Snapshot (Output Pan = Center)

You can assign the SS to a Stomp mode FS if you like - 4 or 5 if you have a two-button switch.

Sorry, that won't work - only one controller assignment per parameter.

You need all 3 of your available Snapshots to do that  - L/R/Center.

[rd2rk]

Rather than edit that post yet again I'll make a new one to offer an alternative.

Use an external A/B/Y box.

[iluvjazznjava]

7 hours ago, rd2rk said:

Rather than edit that post yet again I'll make a new one to offer an alternative.

Use an external A/B/Y box.

That puts me back where I started, but I might try the snapshot option since I don’t really use them much otherwise.