Tigzy Posted February 2 Share Posted February 2 Hello, I saw an update this morning, did the procedure to update my POD go (I have created the backup). During update Pod go edit said "OK, all good". But the Pod itself remained on "Updating"... After a whilte (15/20mns ?) I decided to switch it off and on, now the screen is blank, the device is not recognized on the computer. I tried to flash it back to all possible versions of the firmware, using Update mode (Page -> button trick) or not, all the updates fail. I tried multiple computers, 5 different cables, 10 different USB ports. All fail. So at this point I will purchase a new device, but I'd like to save this one. Any idea what can be done ? Thanks, Quote Link to comment Share on other sites More sharing options...
Tigzy Posted February 3 Author Share Posted February 3 I'll answer myself. I could fix it and get it back. So as I said, no update would work. I tried 2.5, 2.0, 2.01 all failed. Last resort I tried 1.40 update, this time it worked (in Download mode). I could then apply all newer updates, one by one. Hopefully this can help others. Quote Link to comment Share on other sites More sharing options...
shamasuva Posted February 4 Share Posted February 4 Had a smilar issue, use Line 6 CENTRAL to resinstall the firmware, that fixed it for me. Had a smilar issue, use Line 6 CENTRAL to resinstall the firmware, that fixed it for me. Quote Link to comment Share on other sites More sharing options...
adlibmusic Posted February 11 Share Posted February 11 I had the same issue. I ended up using my wife's pc and the update went smoothly. Now I'm back on my pc and the device is not recognized. :'( Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.