kulhari_shirish Posted May 31 Share Posted May 31 Hi all, I connected Line 6 GX today with guitar cable plugged in. But forgot to plug other end of cable into guitar. On opening POD Farm 2 gave a static noise (since other end of cable was not plugged in). I promptly closed POD Farm and disconnected GX from PC. On reconnecting with cable plugged into guitar, the audio output from GX works perfectly as a playback device, but in the Recording tab of Win10 sound control panel, I see no input registered. In POD Farm also no input is registered. The GX worked perfectly until yesterday with both input and output signals. It's not a USB port issue since I have a Rocksmith cable that perfectly registers all input via the same USB port. It's also not a problem with GX hardware, since I have a UX2 as well. And the UX2 shows exact same behavior as GX. I also reinstalled the Line 6 driver just now (latest version) - the behavior persists. So I'm at a loss what's going on - the behavior is specific to Line 6 devices. Please help! Will be happy to share any logs/further info as you request. Also, the Line 6 GX is set as default playback and recording device - with it being active and enabled in windows sound settings. The recording doesn't get registered in the windows sound settings itself, let alone POD Farm (so probably it's not a POD Farm issue). In POD Farm mixer settings, both "Send 1-2" and "Send 3-4" are set to dry input at 0.0 dB. Still no luck. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.