ianc_oxon Posted Wednesday at 03:04 PM Share Posted Wednesday at 03:04 PM Some of my user presets have become noisy. I tried a factory reset & restore but that didn''t cure the problem. I loaded/restored my user presets to a brand new Pod Go today and I still have the same buzzing & humming. My Presets are using different amp models. I tried the Input Gate but it didn't really cure the problem fully. (Tried different guitars & leads = all the same to varying degrees). What global setting could be causing the issue? Any ideas? Pod Go Firmware 2.50 on both units Quote Link to comment Share on other sites More sharing options...
silverhead Posted Wednesday at 06:47 PM Share Posted Wednesday at 06:47 PM On 3/25/2026 at 11:04 AM, ianc_oxon said: Some of my user presets have become noisy…. Were they previously not noisy, meaning this is a sudden development? If so describe what, if anything, has changed other than the sudden noise. Any new equipment like guitars, cables, or speakers? New computer or operating system? Does it matter if USB is connected? Quote Link to comment Share on other sites More sharing options...
ianc_oxon Posted Wednesday at 07:06 PM Author Share Posted Wednesday at 07:06 PM Hi there, no they were not really noisy before, I thought I had a bad guitar lead or two. The factory reset did work briefly before but the problem came back after the restore. Anyway, I have just reset the Global EQ on the original Pod Go and it seems to have fixed the problem, for now. Thanks for posting. Regards Ian C, UK Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.