ColonelForbin Posted June 18, 2014 Share Posted June 18, 2014 question here; I picked up a used M13 recently and it came with a G50 wireless. I've had some fun running the wireless in the 'standard' manner, from guitar to input of pedal, m13 and HD500. Was wondering, can the G50 be used as the output send:?> Meaning, the out from the pedalboard rig to the input of an amp for example? Quote Link to comment Share on other sites More sharing options...
eklynx Posted June 18, 2014 Share Posted June 18, 2014 I don't see why not. As far as the amp sees, it should be just like a standard cable coming from a guitar or pedalboard. Quote Link to comment Share on other sites More sharing options...
Hi_Im_Matt Posted July 25, 2014 Share Posted July 25, 2014 I would try before buying. The latency is surely acceptable coming out of the pedalboard if its acceptable going in, but if you go wireless both in and out you'll be doubling the latency. I would worry abit about potential interference between the two as well (recent RF spectrum changes seem to have more and more devices competing for bandwidth) and would also be interested in the electrical characteristics coming out of the board versus coming out of a guitar. But if you give it a try and it works you should let everyone know ! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.