wolfies Posted July 21, 2014 Share Posted July 21, 2014 Well I was trying to launch line 6 monkey the other day and after having the POD XT Pro work flawlessly over the time since I bought several years ago, for some reason the USB decided not to be recognized. I have followed every thing you are supposed to do,(i.e, unplugged it, different usb port, NOT in a USB HUB). I am able to connect the unit via MIDI but not USB. I tried to do a WINDOWS 7 System restore but I cannot undo what ever happened. When I look in Device manager I see a flag next to a UNKNOWN DEVICE When I click properties of that file I see with in the item description window , Windows has stopped this device because it has reported problems. (Code 43) I have tried updating the usb drivers and every time I cannot When Monkey starts it scans for USB & MIDI it sees my VARIAZ USB that is connected but not on. ( JTV ) I see the PODXT PRO midi turned on and connected but where once was a USB connected device is not. I have tried everything I know how to do and I am sad to think that this unit perhaps has seen better days. PLEASE HELP!! Quote Link to comment Share on other sites More sharing options...
BillBee Posted July 21, 2014 Share Posted July 21, 2014 Just as a check can you try a different usb cable? if that fails too, another PC? Just to see if its the unit, cable or PC? Quote Link to comment Share on other sites More sharing options...
wolfies Posted July 22, 2014 Author Share Posted July 22, 2014 tried another PC & new cable negative no go. markallanwolfe.com Quote Link to comment Share on other sites More sharing options...
BillBee Posted July 22, 2014 Share Posted July 22, 2014 Ouch - if it was a XT bean I would say look to the PS at this point, but for the XTPro its internal. Sorry my man - hopefully someone else will pop in who might have another idea prior to "submit a support ticket". -B Quote Link to comment Share on other sites More sharing options...
Alan789 Posted July 31, 2014 Share Posted July 31, 2014 I have the same problem with my XT Pro. It isn't recognised even in safe mode. Quote Link to comment Share on other sites More sharing options...
muldowneyfred Posted August 4, 2014 Share Posted August 4, 2014 I have the same problem with my XT Pro. It isn't recognised even in safe mode. I have just purchased a new POD HD500X and have exactly the same problem. I have tried just about everything that I could find on the internet.. Quote Link to comment Share on other sites More sharing options...
BillBee Posted August 4, 2014 Share Posted August 4, 2014 I have just purchased a new POD HD500X and have exactly the same problem. I have tried just about everything that I could find on the internet.. Hey There, Welcome to the forums - you should cruise over to the HD section as you might receive a faster and more relevant reply. Be sure to list your setup and what you have tried so far and any revelant messages from L6 Monkey. Standard 1st tests usually are: Try a different usb cable - do not use a hub btw Power supply too - if you have one Try it on a different pc -B Quote Link to comment Share on other sites More sharing options...
coreyzeya Posted February 13, 2015 Share Posted February 13, 2015 I have same problem with my xt Live. I tried with other USB cables but not other PC. My PC is window 7 64 bit. I downloded Monkey, Edit, Gearbox and Line 6 driver also. There is no driver can connect with my PC. Gearbox has include driver but it still can't work. Somebody plz help and solve my problem. It has been occured over 3 months. Quote Link to comment Share on other sites More sharing options...
mrstan Posted January 27, 2016 Share Posted January 27, 2016 Might look in windows hardware list and delete it from there and then re-plug in the cable to see if it recognizes the unit from scratch. The driver might be messed up in Windows for the USB device. This happens all the time for my printers and stuff that is USB like that... - Unplug your XT - Delete the XT USB driver from the list of devices in Windows - Reinstall your driver / software for the XT - Reboot your computer - Plug in your XT and let Windows find it from scratch, ad pay attention to the messages that will pop-up. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.