Raphael26 Posted October 2, 2014 Share Posted October 2, 2014 Exist some method to control the volumes in pod? Amp Vol. + Real Amp Vol. + Master (hd 500) Quote Link to comment Share on other sites More sharing options...
bjnette Posted October 3, 2014 Share Posted October 3, 2014 It is true there are so many ways to alter volume in the unit. I suggest leaving the master out at a set level. You also have the mixer block and in the amo menu there is a master as well, for more volume control. Quote Link to comment Share on other sites More sharing options...
Raphael26 Posted October 4, 2014 Author Share Posted October 4, 2014 Its true if i set the pod master to full, i will get more signal? In pod, the Ch Vol. its the same to all amp's? Including overdrive and clean amps?! Quote Link to comment Share on other sites More sharing options...
MartinDorr Posted October 6, 2014 Share Posted October 6, 2014 CH VOL just brings the output level of the selected amp model into a healthy range (it does normally not change the sound), especially low enough so that the signal does not compress or even clip (you may even be happy with the former but probably not with the latter). If you can measure your amp output signal (e.g. via USB) I'd recommend to stay with peaks below -12dBFS if you want to avoid soft compression. No problem going higher if it pleases your ears. As said by bjnette, the POD Master just controls your final output. Good to adjust for venue (don't change if for different tones as it is not stored with patch. I run mine typically at 9 o'clock for quiet practice in a small room and 12+ o'clock if noone's home. Quote Link to comment Share on other sites More sharing options...
Raphael26 Posted October 12, 2014 Author Share Posted October 12, 2014 Martin What is the level of CH VOL? To clean and distorted amps have the same level. And Amp Vol.? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.