X2 XDS95

X2 XDS95 is no longer made.

Please check out these replacement products:

Manuals

X2™ XDS95 Overall System Specifications
  • Transmission Format: Line 6 proprietary digital audio transmission
  • Frequency Response: 10 Hz - 12 kHz
  • Audio Dynamic Range: Greater than 117 dB
  • Distortion: 0.03% THD
  • RF Carrier Frequency: 902 MHz to 928 MHz, FSK
  • Compatible Channels: Five
  • RF Output Power: 10mw
  • Audio Output Level: Unity gain with transmitter input
  • Polarity: Positive voltage at input yeilds positive voltage at output
  • Transmission Range: >150 feet line-of-sight (may vary due to local conditions)
  • FCC Approval: Part 15 approved, no user-license required
XDT1 Transmitter Specifications
  • A/D Conversion: 24-bit Delta Sigma, 128 times over sampling
  • Input Impedance: 1.3 M-ohm
  • Connectors: 1/8" Unbalanced locking connector
  • Controls: Power On/Off, Channel Select
  • Five Segment LED Display: Power On, Channel, Battery Life, Audio Level Meter
  • Dimensions (WxHxD): 2.4 x 4 x .8" (6.09 x 10.16 x 2.03 cm)
  • Battery Life: Switching power supply, ~12 Hours (9V alkaline)
  • Weight: .25 lbs. (with 9V battery installed)
XDR1 Receiver Specifications
  • D/A Conversion: 24-bit Delta Sigma, 128 times over sampling
  • Output: 2.12V RMS (Unbalanced: 1.8K Ohm)
  • Connectors: 1/4" Unbalanced stereo output, tip= instrument voicing, Ring= full bandwidth, Sleeve= ground
  • LED Display: Power On, Data Link, Channel, Battery Life, Audio Level Meter
  • Controls: Power On/Off, Channel Up and Down
  • Dimensions (WxHxD): 3.078" x 4.7" x 1.17" (7.82 x 11.94 x 2.97 cm)
  • Power Requirements: 9V DC 100mA via alkaline battery or optional XAC2 adapter (tip negative, outer barrel positive)
  • Weight: .45lbs. Approx.