FREE SOFTWARE DOWNLOADS

ATTENTION HELIX STADIUM OWNERS:
Updating your Helix Stadium firmware directly from via WiFi is strongly recommended as the best way to update. However, if you’re using Line 6 Central or the Helix Stadium application to update via USB, always update the application first.

Go
  • Beta
  • Archived

Here are your search results:

Firmware      

 

Powercab 112 Plus Firmware 2.00.1 Release Notes

Firmware 2.00.1 is a FREE Update for users of Powercab 112 Plus. It is highly recommended for all Powercab 112 Plus users to perform this update. This update will not affect any presets that have been modified by the user.

**WARNING** – This update will override all existing Presets and Impulse Response data loaded in Powercab 112 Plus. If you do not want to lose your existing presets or Users IRs, first export them and/or create a backup to your computer using Powercab Edit before you perform this update and reload them after the update is completed. Keep note of the index of each User IR for re-importing after the update.

Note: At the last stage of the update process, the LCD Display will go blank for a few seconds. This is normal and expected. Do not turn it off and wait until it boots up completely.

New Features:

  • 6 New Speaker Models 
    • DINO – Based on* the Eminence Cannabis Rex™. Uniquely constructed with a hemp-based speaker cone material, the Cannabis Rex is described as having a smoky, smooth high-end definition, and boasts a full, clean tonality, with lots of body and sparkle. (pronounced "di·no")

    • LECTO – Based on* the Electro-Voice® EVM 12L. Designed for professionally precise, fully overdriven, punchy tones and brilliant cleans. They are a signature component of the classic Mesa/Boogie® sound.

    • HERALD – Based on* the Celestion® G12H(55) Heritage. Featuring a heavier magnet than the original G12M Greenback, this speaker replicates the sound of the original G12H.

    • BROWN – Based on* the Celestion® G12 EVH®. While the Greenback 20 played an essential role in the sound of Eddie Van Halen's unmistakable sound, this speaker was the based on the 60s version Greenback and used in his signature amplifier.

    • SHADE – Based on* the Mesa/Boogie Black Shadow C90. Custom made for Mesa/Boogie by Celestion in the UK, this speaker provides a tight and controlled low end, aggressive midrange attack, and strong high-bass / low-mid punch. They are a feature in many Mesa/Boogie amps.

    • JETSON – Based on* the Jensen® C12K. The C12K is often paired with Fender® amps for great for a heavy mid and solid, straight forward, slightly darker tone. Can also present bold and heavy overdriven tones.

Want more speaker models? – Submit your requests at line6.ideascale.com!

  • L6 Link Remote Control – Powercab Plus devices include the Line 6 proprietary L6 LINK technology, providing a simple, single-cable connection for mono/stereo audio and remote control capability between a Line 6 Helix device and one or more Powercab Plus systems. This allows you to store and recall Powercab Plus parameters via your Helix device, globally or even per Helix preset!

    For L6 LINK functionality, it is required that Helix device firmware is updated to v2.80 (or later), and Powercab Plus system firmware is updated to v2.00 (or later). For best results, always run the latest available firmware version on all your Line 6 devices.

    NOTE: A 110Ω type AES/EBU (XLR) cable should be used for all L6 LINK and AES connections.

    Use the following steps to configure a Line 6 Helix Floor, Rack, or LT device for L6 LINK remote functionality with Powercab Plus.
  1. On Helix, from any Output > Multi or Output > Digital block, press PAGE> once. Powercab remote parameters appear.
  2. Turn Knob 1 (Powercab Remote) to select:
    • Off - No remote control of Powercab Plus parameters, but audio is still active
    • Per Preset - Powercab Plus parameters are stored and recalled with the Helix preset
    • Global - Powercab Plus parameters are stored and recalled globally
  3. Turn Knob 3 (Speaker Select) to select which speaker(s) you’d like to control. If you have a single Powercab 112 Plus, leave this set to “Speaker 1+2."

  • Input 2 Mode: USB –  Input 2 is routed only to the USB 1/2 input directly and can be used with guitar amp modeling software like Helix Native. Be sure to enable input monitoring in your DAW software and arm the track for recording. To use speaker modeling or User IRs from the output of the DAW, also set USB Mode to "Processed". 

    This mode is intended for the use of Powercab Plus as a traditional audio interface. Plug your guitar or line level feed into Input 2 and you can use a DAW or audio software to process your signal. For example, this mode could be for processing the guitar signal with the Helix Native plug-in, which then plays back through the Powercab Plus amplifier and speaker(s). This could be done with or without speaker/IR processing, depending on the Powercab Plus USB Mode global setting. This method does add some round trip latency and will depend on your computer processing power and buffer settings.

Improvements:

  • Improved Line 6 Link stability and daisy-chain detection.
  • New global settings for MIDI - please refer to the new Powercab Pilot's Guide for full description.
    • MIDI Receive (Off, PC+CC, PC Only, CC Only) - Determines whether or not Powercab changes presets or parameters in response to incoming MIDI Program Change (PC) messages, MIDI Control Change (CC) messages, both, or neither.

    • MIDI Send (Off, PC) - Determines whether or not MIDI PC messages are transmitted whenever a local PC change event occurs (when a preset change is made on the Powercab).

    • MIDI Over USB - (Off, On) - Determines whether or not MIDI data is received and sent over USB. 

Bug Fixes:

  • MIDI Clock is properly handled and passed to MIDI Thru.
  • MIDI Active Sense is properly handled. KEMPER™ users should still power on and fully boot up the Kemper first before turning on Powercab 112 Plus when MIDI is connected.

Want to learn more about Powercab? Join the Powercab community at https://www.facebook.com/groups/powercab/.

U.S. Registered Trademarks

*All product names used within this document are trademarks of their respective owners, which are in no way associated or affiliated with Line 6. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Line 6’s sound model development. Celestion is a registered trademark of KH Technology Corp. Eminence, Swamp Thang, and Cannabis Rex are trademarks or registered trademarks of Eminence Speaker, LLC. Marshall is a registered trademark of Marshall Amplification Plc. Jensen is a registered trademark of Electronics Trademark Holding Company LLC. Vox is a registered trademark of Vox R&D Limited. EVH is a registered trademark of E.L.V.H., Inc. Electro-Voice is a registered trademark of Electro-Voice, Inc. Mesa/Boogie is a registered trademark of Mesa/Boogie, Ltd. Fender is a registered trademark of Fender Musical Instruments Corp. Kemper is a trademark of Kemper GmbH.

Compatible OS: Windows 10, Windows 11, Windows 7, Windows 8, Mac OS El Capitan, Mac OS X, Mac OS Yosemite, macOS Big Sur, macOS Catalina, macOS High Sierra, macOS Mojave, macOS Monterey, macOS Sierra, macOS Ventura
Get Download
Estimated file size: 3 MB

Firmware      

 

Powercab 112 Plus Firmware 1.01 Release Notes
Powercab 112 Plus  v1.01.0 is a FREE firmware update that includes fixes, stability improvements, and optimizations. It is recommended that all Powercab 112 Plus users perform this update.
This update will not affect any presets that have been modified by the user.
Thank you for using Powercab!
Improvements:
§  New Global setting: "Direct Out Level" switches the XLR output between Line level or Mic level for connecting to a mixer or audio interface that only accepts a microphone level and avoids clipping when Powercab is gain-staged for maximum output. It is also now set to Mic level by default.

§  Fixed a bug which caused a loud feedback issue to occur when muting the tuner output while using Powercab 112 Plus over L6 Link with a POD HD product. It is highly recommended that all POD HD 500/500X users install this Powercab update immediately.

Compatible OS: Windows 10, Windows 7, Windows 8, Mac OS El Capitan, Mac OS X, Mac OS Yosemite, macOS High Sierra, macOS Mojave, macOS Sierra
Get Download
Estimated file size: 988 KB

Firmware      

 

Compatible OS: Windows 10, Windows 7, Windows 8, Mac OS El Capitan, Mac OS Mavericks, Mac OS Mountain Lion, Mac OS X, Mac OS Yosemite, macOS High Sierra, macOS Mojave, macOS Sierra
Get Download
Estimated file size: 3 MB