ade_neto

Hy guys! It's not the solution, but helped me a little bit and I want to share this experiences with you all. I had in my possession for a few days a Kemper and HX Stomp and used them to match the tone of my presets. After many hours of tweaking I felt some improvements: 1) Pod Go doesn't like cables with more than 10 ft (3 Mts). I've tested a few different guitar cables and discovery that some cables have a much brighter sound, and 10 ft is the maximum length you should use. The difference is significant; 2) Used the "Low/Hi Shelf" EQ to smash all frequencies below 500/600 Hz by at least 2 dB (or more), and increased the high end until it matches with Kemper. The 2/3 kHz are the sweet spot; 3) Change you IR and cab and also the mic. To me the best result was a combination of the 112 Dynamic mic with the 2x12 Interstate Cab. I also changed the high cut to off; All the experiments was made to match the sound to Kemper profile with the same amps (Matchless and Vox AC30 by Michael Britt). After four days and a lot of work I've decided Pod Go will continue as my main equipment, but I would be very happy if Line 6 fix this in the next update. One last though: Maybe it's not a flaw but only a different approach from Line 6 as I felt the same lack of crispness from HX Stomp. I'm also thinking if I could ever found out this issue by myself and the answer was: probably not... Final thought: for me ignorance is a bless!!! LOL Sorry for the bad jokes, I'm just trying to help. Cheers!

I stick a Boss TU-3 before the Pod Go and the sound changed drastically, not just a bit I can assure to you all. I don't think a factory reset can solve this problem, but I'm considering it.

I'll return the Pod Go. The retailer will send me a new one. Thanks for all the help!

Thanks for the advice but I already have PGE v1.30 installed, but it didn't recognize my Pod Go, only the Line 6 Updater when I use the update mode (pressing Page > while booting up).

My brand new Pod Go worked for a few hours, but in the next day it got stuck at the boot up, as you can see in picture. The Line 6 Updater detects my Pod, installs the update, tells the installation was succeed but the problem remains the same. Did the same process in three different computers, two PCs and one MacBook with the same results. I'm very frustrated cuz I read a ton of messages saying that eventually it will work after using the Updater, but I did it about 50 times and nothing!