jesuscares

You were absolutely right.The tones didn't get transferred as the 120 memory slots were full.I thought other folders below it were free, not realizing that they were mere pointers to the main User folder.Now when I cleared some, everything worked normal except the fact that I was able to delete presets from the stadium unit & not on the app for some reason today!.I hope the day comes when we wont have to connect to internet to communicate between unit & computer.Anyway thanks for the great help.I will withdraw the support ticket & enjoy the Stadium & search for new tones online.Thanks I did enjoy the stadium but it takes some rebooting on the app & Unit every half hour as I do get error 103 & 21 I think.I hope they get it resolved by the next update. Keeping my fingers crossed!

I just noticed that on the main folder which says USER PRESETS on the unit, all the 128 slots are full! On the folders below it there are empty slots.So I guess the memory is full from what you state above! Could that be a reason for the error? Let me try clearing some of the 128 slots. BTW is it possible to delete presets directly from the stadium unit? I dont see the option.

I have just opened a support ticket since the issue is not being resolved.I found that even without using a computer, saving a factory tone on a an empty slot seems impossible.It is only allowing me to overwrite an pre-existing tone on a user slot! I wanted experiment using a different old Mac but I guess the stadium app is not made for Sonoma OS.

Exactly! They sold the Helix too soon I guess!

Thanks. I guess I will open a support ticket. Lastly I was able to import a couple presets clicking on the header list above the edit app but then it does not import into an empty slot but overwrites to an existing preset . Even factory tones when edited & saved , gets saved over a preexisting preset & not on an empty slot. I’m now wondering if I have overloaded the unit with too many presets from my older helix . Is there a way I can check the existing memory of the unit? Thanks

The Editor app is going crazy on my computer & does not transfer tones! I wish someone will get the app updated.

Just an update although there is no response yet.I reinstalled the Stadium edit app & Line 6 central although they both were current.With stadium app disconnected I was able to get Central to recognize 'Helium' (maybe a nice name for Helix Stadium ) : ! After disconnecting the central app I connected to the freshly downloaded Stadium Edit app which refused many times although it was on the same wifi network. Finally got that going, but when I tried transferring.hsp tones from my Mac to stadium I once again hit the same error bug! Line 6 central shows my Stadium up to date but also indicated a firmware file to download (not sure how that happens simultaneously! ).So I hit the download button on the Central & reinstalled the firmware or Helix.Let me see if it's transferring files now ! Well after all the trouble ,I am still running into the same issue & getting error 103 message rejecting the transfer of tones.I'm wondering if I am the only one having this issue as there's not much talk about this.Quite disappointed! Should I return the unit or wait for the next firmware /app update?

Just checked the app version.It says 1.3.2.I'm running it on Mac OS Tahoe 26.4.1 .Will there be any interference with other apps.I have Logic Pro & UAD Apollo plugins on the same computer. I have transferred all my Helix LT presets on the Stadium (not XL).Will there be any clogging of memory that prevents the upload? I'm not sure how much memory I have left & if there's anyway I can find ,that may be useful to know too. I connect the Stadium to my Mac book pro using the USB C out/in on both sides.Is this the right way?

The firmware is the latest.I also downloaded the latest version of the app yesterday, but let me double check if it got installed properly.I downloaded some presets from Jason Saddles site & then exported & imported some of my own presets & factory preset from & to the Stadium & got the same error message.I will probably delete the Helix app & try a new installation.Thanks.

Been trying to work on this but I keep bumping into this Error code while transferring .hsp presets. I also tried exporting a preset from the stadium & importing it back & I get the same error code! Stadium edit is on the same internet connection & I am able to edit presets.But when it comes to importing them from Jason Sadie's website & other .hsp tones I get this error.Really time consuming & bugging ! Been trying to import the same tones I imported an hour back & now it gives me this error message.Would this be a Stadium app bug? Can someone help pls. For some reason, when I open Line 6 central it says "no device connected" although stadium is connected & syncing with the stadium app! Has this got something to do with this malfunction? Also when I try to edit a factory preset it does not allow me to save it on an empty slot, instead I am only Overwrite it to an existing User slot! Never had so many issues with the app & stadium on my older Helix floor!

Thanks for the response. I guess I can't trust the AI answer on the internet that said the opposite!

I thought the Stadium edit app would open up as a plugin within Logic or any other DAW,but I don't see it listed.I wonder if it's supposed to show up as a plugin.

Thanks a lot.I updated to the latest firmware just now & I am now able to use it as an interface with Logic Pro.However I'm unable to view Stadium on the plugin list.I see my old Helix Native listed though.Isn't Stadium supposed to show up as a plugin in the plugin list?

Hi, I'm having trouble setting up Stadium with Logic as I dont see it listed on the devices.I do see a Helix listed in the Audio Midi setup (probably when I use it with my older Helix) in my Mac but it is not highlighted.Maybe I need to configure it there first & I'm not sure how to do it. I didnt find videos or any help from the manual on this. BTW I'm able to connect Stadium to the Stadium editor app on my Mac without an issue! Can someone here help? Thanks

Great ! That should work for me now even if there is no bundle swapper! Thanks

It's unfortunate that the L6 custom tone site does not cater to the Helix Stadium.Any suggestions where I can find User tones?

Thanks! But apart from Its can a Stadium Setlist (or entire User tones) be saved on the computer & sent or transferred to a different Stadium Unit without having to use a Micro card?

Thanks.I did see it in the manual yesterday but it's quite a surprise that this same data cannot be saved on a computer & be retrieved ! I hope L6 makes a way for that.Thanks

Can someone explain on Saving & transferring a Stadium bundle including the IRs to a different Stadium ? I couldn’t find the save bundle icon on my Mac . I'm not sure how tones are arranged on the Stadium.On the Edit app & the Stadium I see factory presets & then below that User presets & my transferred files from the old Helix below that.I tried deleting the entire User Presets folder but wasn't able to do so.Only Individual presets in the User folder are open for deleting. I just tried transferring a .hsp & .hlx preset to Stadium & I seem to get error code 103 !Confused! Thanks

Can someone explain on Saving & transferring a Stadium bundle including the IRs I have on it ? I couldn’t find the save bundle icon on my Mac . Thanks

Thanks a lot.It sure did work with a TRS cable.Also my sonicake cheapo Chinese pedal works! Thanks

Anyone using a Behringer FC600 V2 Exp Pedal with Stadium Floor? Just got my Stadium Floor & I read somewhere that it is compatible with Helix.I'm not sure how to go about getting it to work as a volume pedal .Couldn't find any videos or instructions on how to set it up.Any tips would be appreciated. Thanks

Does anyone know how to export import IR bundle 's on Helix native.When exporting the entire order of the IR's change to alphabetic order.While importing the bundler's dont get imported.

I wish Helix can do more than 128 IRs!

Thanks for the response.Yes IR's are probably the downside of the current Helix model.I'm even having trouble with Helix Native importing & exporting IR's.When I export an IR bundle from Native,the IR files reorders itself alphabetically & now when importing it back the path is missing!