Findlasse

Great idea! :-)

Thanks a lot guys! - I really appreciate your help! - thanks a lot!! :-)

"join" : { "@model" : "HD2_AppDSPFlowJoin", "B Pan" : 0, "@no_snapshot_bypass" : false, "B Level" : 12, "A Level" : 12, "A Pan" : 0, "@position" : 9, "Level" : 0, "@enabled" : true, "B Polarity" : false

Sorry - I just noticed you wrote some code - I guess it can only be set via the Helix then??

Loaded your preset - and it works perfect! - I am very thankful, as I think it will become very useful for the sound variations I need in the acid rock trio! :-) I tried to find where the panning is set for the mixer, but I don't find it. Where do I find the settings for that?. BR Lasse

No problem - I'm glad you would take a look at it! Thank you! I can't try it out before later today, but I really look forward to it. Thanks again! :-)

A-B Preset.hlx here is the preset

Sure - I will do that. I'm glad you will take a look!. Has to make a little later - tonight. Time is right now 9.49 in the daytime. :-)

I'm stuck! :-)

Yes, really odd. I use Dhyana drive on path A and Simple delay on path B. Both stereo

I think I got some progress now. Made signal path A and B. Put drive on A and delay on B Split Signal Flow Settings: Split A/B Mixer Signal Flow Settings: Main LR, Path B output Split Control Settings: RoutTo: Parameter, Exp1: Controller, Min value B100, Max value A100 Mixer Control Settings: A level, Exp1: Controller For now it works :-) A nice way to go from a spacy ambient sound to a sudden rock in your face sound. And back again. :-) UPDATE UPDATE UPDATE - 5 mins later! : Still works fine, BUT When connecting 2 amps, which I use gigging - 1 to L/Mono output - the other to R output. I only get sound to the amp connected to L/Mono!!. Help needed on this issue! :-)

I am lost somewhere. It sounded ok yesterday at very low volume with only 1 amp. Found out I had it set for stereo, so today it did not sound right. Guess I was dreaming yesterday! :-) Tried to make it real simple today trying to get to the bottom of it - but I got lost anyway. Maybe it is just not possible!?. What I tried was: Uni-vibe in signal path A - Teemah drive in signal path B The goal is - with expression pedal - to have only path A (or B) open with heel down - and to have only path B (or A) open with toe down. Without dropout or sudden cuts. Fading in A and B out. The split can't be controlled to route to either A or B - at least I don't get it working. And the same with the mixer, I guess. Is it possible, do you think?. Anything I have missed?

Oh man - It is the HX Effects unit I got - not the Helix. Sorry for the trouble, but HX effects don't have it's own forum. :-(

Kilrahi - not quite sure I got it to work yet. Sounds a bit thin (maybe because I try on low vol.). I made path A with Uni-vibe and delay and path B with drive and delay. Some delay from path A is heard on path B even with path B's delay turned off. Otherwise it seems to work so the dirt morphs in and Uni-vibe is out. Has to try on higher volumes to determine if it is good or bad.

Meiannatee - yes, but I would like one path (clean with effects) to volume down to zero while the other path (dirty with effects) volumes up by pressing the expression pedal.

RiggerOne - do you remember the name of it?

It seems to work - just tried quickly with A and B paths manipulating the mixer B level, B pan and B polar with expression pedal - normal min value and invert max value. Seems to work. Andy Summers seemlessly morphing into John Sykes :-) Try to set someting up tomorrow and check in depth!. Thanks a lot for helping me in the right direction!!. :-) :-)

Thank you Sir! - this is what I want. I give it a go again. In my attempt to do so I had the mixer block at the beginning. I did not succeed in routing to either A or B for some reason - maybe it works better with the mixer at he end of the signal path. I am happy you say it can be done. It gives me relief to give it a go again! :-)

Thanks! :-) I may have expressed it unclear (I'm danish). What I am after is sound1 to fade out and sound2 to fade in - using the expression pedal from top to bottom. Sort of seemless transition. Is that possible to do with the HX??

Thank you for answering! :-)

Thank you Brad - nice to know! :-)

Hi! I had a Vetta II earlier and it had a great feature. With the floorboard pedal in top position - I had a nice Police-like clean sound - pressing the pedal down to bottom position - the sound transitioned into a nice dirty sound. I tried to mingle with the HX to get the same option, but with no success. Thought it might be possible with 2 signal lines and then using the expression pedal to route to either 1st or 2nd signal path?. Is it possible on the HX effects??

Hi! I just realize how much I miss Riffworks as a workstation - especially the drummer - and all the great drums I bought and downloaded. Is it lost forever? I did not really understand what happened back then and got carried away with other things as time went by. All in all it means that all the drum patterns I bought is wasted??. I do not even know where they are now, but I must registered somewhere: Is it possible go get them back - and Riffworks up and running again?? BR Lasse

Does Helix Native work with HX Effects?