Jump to content

tcastudios

Members
  • Content Count

    17
  • Joined

  • Last visited

Community Reputation

0 Neutral

About tcastudios

  • Rank
    Just Startin'

Profile Information

  • Registered Products
    2
  1. Thanks for the info Digital_Igloo :) Cheers Lennart
  2. This starts to get funny.. :) I -know- what Global means. If it is edited it affects any preset. And that is fine, that is exactly what my inserted analoge EQ does for me. I now use the inserted hardware EQ to adjust the acoustic guitar I use. That is, if I have a problem with the acoustic I only have to adjust the hardware EQ and it affects all my acoustic presets. When I use my electric guitar the hardware EQ is simply bypassed (loop slot not engaged). So, again, all I need to figure out, can the global EQ be on or off per preset? Nothing else :) Simple question, right? Regards Lennart
  3. I use both acoustic and electric guitars in the same show. So, again, all I want to figure out for my purposes; can the Global EQ be on or off per preset? All other ideas and inputs are all fine but I only want to know about the Global EQ on off possibilities :) Cheers Lennart
  4. I just wondered if it is on or off per preset, that's all. (My acoustic would benefit the EQ (globally), my electric not) Cheers Lennart
  5. Global EQ preset onoff? Looking forward to the upcoming global EQ. Will it be possible to have it on or off per preset? Reason, now I use an external EQ in the loop used only for my acoustic guitar. Regards Lennart
  6. Being foremost a singer but also playing guitar at the same time, not to confuse myself in the heat to much, I've set up my presets as: The expression pedal is the "first" fx of the preset. (Usually controlling my Voice fx unit) F4, the second fx, F3 the third etc, Then F1 is always a ProgramMessage to the Voice processor. There is one preset per song so whatever comes up first I can hit the F4, whatever it is! Just one way of doing it, I guess :)
  7. For my acoustic patches I inserted a parametric EQ for hands on adjustments. The EQ is then the same for all patches. Cheers Lennart ps, my bandmate insets a EHX SuperEgo for supercool Drone / string fx's ds
  8. No, but you could try a Midi loop (Midi Out->Midi In). Then let FS2 send CC FS1 off, FS3 send CC FS2 off etc.. Calls for for some experimentation….
  9. I assign a "non block" like a volume pedal at full level to the same FS used for CC's, then I see that I've stomped it :) Cheers Lennart
  10. All I can add is that my new Shortboard and the EX1 have the same issue. The EX1 needs to be reconnected after start of HD Pro X. The problem I then get is that the midi CC I create with the EX1 is often not calibrated correct. I often need to restart the HD ProX at least once making sure the EX1 is either full on or off. Thing is, the EX1 works but the EXP2 (green light) is not lit. Cheers Lennart
  11. Doing the research for side upgrading from HD500 to FBV Shortboard MkII/HD Pro Rack. Looking into the docs for both units, I wonder: Are the Function 1&2 switches (the upper ones) truly hardwired for Loop and Amp switching? What I'm trying to figure out is to use the FBV as a Midi controller for other devices, connected to the HD Pro Midi Thru. In the best of worlds, as I don't use the looper and can do all internal switching I need with the "F1" to "F4" switches. The Function 1&2 would then be perfect to send external Midi messages. But looking in the manual for HD Pro, the LCD looks the same as on my HD500 and I can't see if the Function 1&2 are able to be set to Midi send. Cheers Lennart
  12. Ah, thanks. So, basically the F switches on the shortboards are "the same" as the F switches in the floor model. That is, I assign them in the HD Rack the same way as I've done before. Cheers Lennart
  13. Does it come with the hardware for rackmounting? I have a half rack space free ( the other half is my EIM device) and would like to use that "free" space. Also , can the antennas then be placed/mounted in the -front- of the unit? Instead of them get hidden inside the rack. Cheers Lennart
  14. Looking into side grade from HD500 floor board to a shortboard/HD500 Pro (Rack) and looking into the docs it struck me: How do one assign turning specific fx blocks on and off? On the floor model, I can freely assign any F switch on the unit to do that. Looking into the shortboard docs, it looks as if the switches are set -globaly- and doesn't follow any program changes. Am I missing something? Cheers Lennart
×
×
  • Create New...