Hello All,
I've searched through these forums and haven't found an issue/post about this, maybe someone can help?
I've had the HD500X for about 4 years now, been working well or acting as it should this whole time.
Just recently noticed I'm having an issue with one of my controller knobs/pots. It is the "MID" knob.
There seems to be a lag, or a "dead space" between where it shows the position on the mini screen, and where the knob is actually positioned.
For example, I'll move the mid position all the way to 0%, then move the knob to 25% (9 o'clock).
Though the actual knob is at 25%, it shows only 2% on the mini screen.
The readings are way off by like 25%, until the knob gets to about 75%, then it seems to be closer to or on the money between the two.
Working my way back from 100% down to 0%, it just jumps down way too fast below where I'm actually at.
It's the only knob/pot that is having this issue, and I can't figure out why or how to solve it.
I've tried global resetting, re-updating the flash, test mode/calibration screen. I have no idea if there's anything I can do myself to fix this issue.
If anyone has had this sort of problem, and can help point me in the right direction I would appreciate it very much!
Thanks