TimAndSmith

I have definitely tried all the combinations of snapshots and footswitch combinations. It's not a status reversal. Snapshots just doesn't seem to control the LED status like it used to. I can work around it and hopefully it will be addressed in a future update. Also hoping for a global setting where you can set default status on snapshot bypass control rather than everything defaulting to on. There are definitely more "bugs" and basic functionality missing that I was expecting with Stadium but the sounds and hardware are AMAZING! The rest will come in time I suspect.

I'm having an issue with assigned controllers and snapshots. In Helix floor I often assigned some controls to a foot switch like an amp gain boost or raising reverb mix and time. Helix would treat that button just like a stomp switch. If I had the controller on and saved it to a snapshot it would be on. Both the parameter and the state of the button would change with the snapshot. Now, in Stadium, if I save the controller/button in a snapshot, the parameters change but the state of the button does not change. I.E. if the button is a reverb boost, the snapshot saves the parameters for the boost, but the button does not turn on/off with the parameter change. I have flipped the switch for "Snapshot Ctrl" in the saved parameter so that's not it. Am I missing a setting somewhere or does Stadium just not work this way at this point? It's not the end of the world if this won't work with Stadium but it's real nice to be able to see the state of an effect or setting by the on/off light on the foot switch as you move through snapshots.

Just wanted to echo the BIG THANKS Craig! So much extra good stuff in a book that already taught me a LOT. The mic and cab graphs are really helpful. Thanks for all your work!!!

You can also use the “infinite” setting on the newer dynamic hall and plate reverb. Their delay time goes all the way to infinite at the upper end of the time slider. You can set a foot switch to either latch or momentary to do this. If you wanted, you could also set that same switch to bypass the reverb and if you had tails enabled it would keep going. This kind of thing would be more similar to what the strymon pedals do than poly sustain. Good luck!

Maybe the new snapshot “features” help some of you but they have made it a lot more complicated for how I use them. I like to set snapshot buttons through the control center so I can put them where I want them. With this new behavior, if I want three snapshots, I have to set all three each time or when I step on one the others change. I’ve tried to find a workaround to make it as simple as it was before but I can’t figure it out. Has anyone found a way to simplify this process?

shoot. I missed that line. Thanks man! will do

Looks like the update that's just been released offers Silicon support finally. Can anyone verify that it runs well on OS Monterey?

I know wisdom dictates to wait but I’m just curious if anyone did it yet and how HX Edit and/or Native are working?

According to this chart it looks the same. https://benvesco.com/store/helix-dsp-allocations/

Thanks for all the responses. Thanks especially to codamedia as those settings worked really well for the amp. This post, along with some YouTube videos I happened to watch, actually pointed me back towards the stock cab. I have definitely been of the opinion that the stock cabs were no good and have been using IR's for years. However, when I started using some real metering from inside my DAW (the multimeter in Logic Pro X) and doing some real deal volume matching, I found they sound way better than I remembered. It's always amazing how much volume differences effect your perception of sounds. The stock HiWatt cab sounds really great. I still really like Redwirez IR's but with their HiWatt cab there is something weird in the sound. It's a mid-range honk like a wah pedal left on to my ears. This was only more apparent to my ears when I dialed in the stock Helix cab and a/b'd it with the Redwirez one. Anyway, I love lots of other Redwirez IR's and I'm going to definitely give the stock cabs more of a chance in the future. I especially like how you can get multiple dual cab blocks in a preset to blend mics. This is more difficult and processor intensive to accomplish with IR's unless you buy their IR's mixing software. Thanks again!

The only IR I currently have that's a real HiWatt cab with Fane speakers is from Redwirez. I really like their IR's in general and I like their HiWatt but I feel like it has a weird bump in the mid-range. Not sure if that's a real HiWatt things or just how theirs sounds. For those of you who like this amp, what's your favorite speaker cab or impulse response that makes it work?

I am doing the same thing, using the big sky in a helix effects loop. The only downside to the setup you’re talking about is that everything before the speaker cab block is summed to mono. Part of the glory of the big sky is it’s huge stereo sound. If you want to maintain the stereo image you have to put the loop after the amp and cab. The exception to this would be amp, then big sky in stereo loop, then split to two paths and put 2 speaker blocks. That would keep it stereo and between amp and cab.

For what it’s worth, I just got a new MacBook Pro/M1 and it’s working great with HX Edit. Seems more stable actually with less communication drops than with Catalina. Haven’t had a chance to try it more with Helix Native in Logic yet.

Thanks for the help guys. I'll submit a ticket and see how it goes.

Lately, one half of the light ring around my tuner/tap button on my Helix floor has stopped working. At first it seemed intermittent, off sometimes and on others. Now it always only lights up half of the ring. Anyone else had this problem? Can anything be done to fix it? I've had this for about 4 years so it's way out of warranty.