Jump to content

j_leblanc88

Members
  • Content Count

    5
  • Joined

  • Last visited

Everything posted by j_leblanc88

  1. j_leblanc88

    Patch Volume Raise Randomly Live

    Hey Guys, So I've been running a PODHD500 into a DT50 (112) using the Line6 link. I have all my patches volumes carefully set evenly to make sure they boost appropriately for leads etc. I run the Master on the POD all the way up and the Master on the Amp at around 9 oclock for most rooms we play. The problem I've been having lately is that when I change patches (say for example to my lead patch), the volume goes WAYYY too high all of a sudden, even though I have it set at a comfortable level normally. Then, If I click the same patch footswitch a second time, the volume goes back to normal. I've made sure of the obvious, that my levels werent accidentally adjusted and Im not accidentally hitting any volume knobs. I have all the latest firmware, and take great care of my gear, so I'm a little dumbfounded. please help if you've experienced this. Thanks! Jordan
  2. j_leblanc88

    Patch Volume Raise Randomly Live

    Tried a piece if duct tape over the pod preamp knobs and problem solved! Gig went off without a hitch. Thanks for the helpful input folks.
  3. j_leblanc88

    Patch Volume Raise Randomly Live

    This seems like a good idea ill try it tonight and let you know if it gets any better. It is a very small stage so that could ver well be the problem.
  4. j_leblanc88

    Patch Volume Raise Randomly Live

    Yea ive set them when in rehearsal at live levels so there should be no issue there
  5. j_leblanc88

    Excessive echo from DT50 112

    So I purchased a Line6-DT50112 and POD HD500 combo back in January. When used together i got great live sound. Lately however, my Dt50 sound like utter garbage Im getting an excessive echo/reverb that makes all my patches sound terribly wet on stage. Ive checked my output/input settings on the Pod, currently setting Outputs to Combo Power Amp (also tried combo amp front) and Inputs to input 1-Guitar, Input 1-Variax (Also tried Input 1-same). Long story short, Ive read all the manuals and I know how to make the proper connections. I also tried the obvious, making sure all my patche's individual reverb/digital delay settings were in check and making sure the reverb knob on the DT50 was turned all the way down. Even when i completely shut off all reverb and delay in the FX chain, the echo is still there. My tubes are not very old, and they have given me no sign of damage up until this. Im usually VERY Careful with my amp. (its never been thrown around or banged up, and im always letting them heat up/cool down properly) Has anyone experienced the same problem? Please give me any suggestions you can. This is very stressful as this started happening last night at a gig.
×