ddufour

That did the trick. Thank you for your help.

EXP-1 is set to wah and is off in the fx screen. EXP-2 is set for volume and is on when I go to the fx screen. EXP-1 led is red next to the pedal.

Hi. Just did a pedal calibration but it didn't fix the problem.

I have downloaded a lot of custom tones from the site. Occasionally I will get a patch without a volume pedal in it. Sometimes when I add it, it works fine, and sometimes it doesn't work at all. I go to patches that it works in to see exactly how it is set up including the controller section of the editor and duplicate it, but still doesn't work. Any reason for this?

The only problem is I only have access to the pa once a week at practice. Need to be pretty close to getting the sound at home because no time to tweak at practice. May need to get an amp.

I just purchased a Pod500X and plugged it into a Behringer Eurolive B205D that I use at home and when I play out as a personal monitor for my guitar. I have been using a Boss GT100 going to a direct box to the pa on the left output, and the Behringer plugged into the right output. That way I can set the monitor to any volume so I can hear it, and not affect the volume out of the pa. So my question is, if I can make the Pod sound great thru the Behringer monitor, would it sound the same coming out of the pa if I connect the output of the monitor to the pa? Or if I played into the effects return of an amp that also had a line out, and go to the pa, would that sound the same as an amp?