airguitargb

Hi all I have battled with my HD 500 for a few years, I have posted on here previously, watched you tube videos trying to set up etc and still have issues with a Hum I can't get shot of whatever I try. I have tried 4 cable method with a. Marshall DSL50, Tech 21 Trademark 10 watt amp and now use a Blackstar HD 60 stage. Also gone direct into a Thomann T box pro active monitor. I get a hum whatever setting I use even with NO amp on the HD500 and no effects ie guitar into HD500 and out into monitor. I have played with the inputs, outputs, ground lift, pad, line,stomp settings and no change. I have changed cables and it happens in all locations so I do not believe it to be an earthing isssue, also changed power supply. Any ideas or do they all do it? Thanks

I use amplitude doe iPad and a Tascam IX 35 I think as interface, wondered if peeps here think worth getting sonic por? I have downloaded Mobil pod app today and looks quite good. Been using XTlive and now HD500 live for 9 years so well familiar with Line 6 etc Thanks

Thinking about giving amplifi a go but not sure how useable it is live for changing patches with a foot switch. I have an HD500 which I normally use 4 cable method to connect to a blackstar amp. Can I use the HD500 with amplifi to switch patches and turn individual effects on off?? Thanks

Thanks that makes sense Now to work out how to asign the on off state to the toe switch. Thanks

Hi I wonder if anyone else experiences the following issue at all or has any ideas to overcome it. Set up HD500 connected via 4CM to Blackstar HD60 I am very happy with the a very simple patch I have for most of my songs as follows Looper > volume> gate> distortion > blackstar preamp > mods>delays> blackstar power amp If I then add a Wah effect next to volume I loose a lot of the quality tone even when it is not on, so I mean I have added the Wah effect into the signal path but it is not engaged. I fully understand that the sound change ps when I kick the Wah in using toe switch but can pt understand why it does it even when not on. As soon as I take Wah out of signal chain overall tone returns. Any ideas?? I was thinking about getting a separate Wah pedal. Thanks

Jandrio I don't plan to use the blackstar for acoustic. Planned signal chains are input 1 POD. Electric guitar connected to blackstar using 4 cable method Input 2 POD aux in then XLR out into desk Hope that works

Thanks guys So answer is yes works Asa DI box but I wonder if that is also while by electric and amp are all connect to the HD via 4 cable method. What I am trying to say is can I instantly change from my electric to acoustic without any unplugging and re plugin in cables? Hope that makes sense

Hi I used HD500 and connect to Blackstar HD60 stage using 4 cable method using electric guitar with no major issues but just about to start a new band project that will introduce more acoustic guitar. my question is can I use the POD as a DI box, if so how please or do I need to get a separate DI box. Guitar is Yamaha APX500. Thanks