Jump to content

aed1421

Members
  • Posts

    57
  • Joined

  • Last visited

Everything posted by aed1421

  1. aed1421

    Digital noise

    I have tried multipile playback systems. Guitar straight in (no wireless) with headphones out using Sennheiser HD 280 headphones. Guitar straight in then stereo XLR outs into Beheringer UMS 404 HD. Guitar straight in then out to QSC K12.2 and/or out to EV ELX 112.
  2. aed1421

    Digital noise

    Hello all. I seem to have some type of noise or digital distortion on this patch (and each of the snapshots). I get it no matter what guitar I am using (Elite Strat, PRS CE, High Performance Gibson 2016 LP). I can only get it to stop if I play very lightly. Can someone take a listen and provide advice to correct? BTW, this is a patch I purchased. SP Mark V25.hlx
  3. aed1421

    Market Place

    Found it. Thank you.
  4. Thanks for eveyones help with this. Still can't get channels to change on the amp. I will seek out someone localy.
  5. Sorry. Here it is. dsl40cr control.hlx
  6. aed1421

    Market Place

    I just bought some presets from the Line 6 Marketplace but there is no download info. I recieved 2 no reply emails one that has the invoice. I Have v. 3.15 for Edit and the Floor . I went to my account and there is nothing to download. It just says that I purchased it.
  7. Sorry this is so late. I just got off the road gigging. I can't seem to get this to change any channels on the amp. I have the amp in MIDI waiting mode with a midi cable attached to both the Helix and the Amp. The 2 button switch is not hooked up. I can see the dsl40cr control on the top row and can see Clean (1) Cruch (2) OD1 (3) and OD2 (4) on the bottom. None of the snapshots change the amp channel.
  8. I've updated to 3.15 on both the Floor and Edit. I copied dsl40cr control to the Floor (thank you tmingle). In HX Edit I can see everything and I can see dsl40cr control on the Floor but no sound comes out (changed the ouput to multi) and I can't see the snapshots or anything on the footswithes. I initialized the DLS 40 to recieve midi commands and loop on/off is blinking. I restarted everything and still nothing. Thoughts?
  9. Thank you. I can see it there.
  10. I can't seem to a recent thread that I started about MIDI switching using a Marshall DSL40. I've restarted my computer multiple times with no luck. Can someone from Admin assist?
  11. Sorry to be such a nube. My options in the Command Center under Instant 1 are: MIDI CC MIDI Ch CC# Value Waiit Time. Not sure what to put for each one of these. Also, I tried to download the patch but this is what Helix says.
  12. Hello, would there be anybody on this forum that could help with detailed instructions on how to set up midi switching between my Helix Floor and a Marshal DSL40C. I would like to be able to use all 4 modes on the amp in conjunction with the Helix Floor without using the Marshall footswitch. Thanks in advance.
  13. aed1421

    Tube Amp

    I can only access the 2 channels via the helix ext amp setting and not the 2 modes in each channel on the DSL40. I think I can access all 4 via midi but that is another cable to hook up on the road. The Classic Gain and Ultra Gain have a lot of tone difference. I would prefer to use the 2 modes in Classic gain and switch just between those and use the internal effects/drives in Helix.
  14. aed1421

    Tube Amp

    This helps. I would prefer plug and play as apposed to the 4CM.
  15. aed1421

    Tube Amp

    The people that have hired me want me to use a tube amp on an upcoming tour. I think the Helix does everything I need and more but I am not paying myself. Having said that I need a nice small tube combo that works well with Helix. 4CM + Ext Amp switching will likely be used.
  16. I haven’t read through the DSL40 manual yet but just want to know if anyone has experience this. I have Helix set up via the 4CM with Ext Amp switching. When I plug in to the FS on the back of the amp and connect to the EXT AMP jack on Helix I lose the effects loop (Loop on/off). ROD CLN PED.hlx
  17. It's all good and same here. I read every day...unfortunately not the manual as much as I should but that will change.
  18. I'm not offended and I am learning...just not at the rate I would like. I did watch the video but thought a 2nd hand response/explanation would not be as accurate as referencing the video to get exactly why he used send 1 and return 2. And I agree, providing a time marker would have helped a lot. I will get better.
  19. I apologize for wasting your time. I was just looking for help and insight on some things I wasn’t familiar with. I will start referencing the manual instead.
  20. That's how the guy in the video said to do it. He explains his resoning.
  21. Sorry. Just now starting to experement with all things Helix. DIRTYELTON.hlx
  22. I just purchased a Marshal DSL 40 that has 2 channels. I have the Helix set up to switch the channels on the amp and that works fine. However, the DSL has 2 footswitch-able modes in each channel and with the 4 or 6 way footswitch I can access all 4 modes. You can switch the effects loop and 2 master volumes on and off with the 6 way. It basically functions as a 4-channel amp. Is there any way to control all 4 modes/channels in Helix?
  23. Sorry, I found a way to post as you can see,
×
×
  • Create New...