PlayinOcean

I just read in the HX manual that you can only asign line or instrument level to a combined fx loop in + out, instead of the two independent. This might cause problems for my setup: I want to send my signal from my guitar through HX to the amp at instrument level (as my amp-input is designed that way). Then, after the amp has fed the signal to the load box, I want to take the line out of the load box to the return input on my HX on the same fx-loop. That way the procedure only takes one send/return block. I also need to use a block for the IR, so that's two blocks used already before any effects are chosen. If the send/return pair is set to line I send a line signal into my guitar amp, if it is set to instrument, I recieve a line signal from the loadbox into my HX... I really don't want to be forced to use two different fx-loops (and two different blocks) to do the HX-->amp and the amp(/loadbox)-->HX. Does anybody have any experience with this setup and/or any advice on how to proceed?

Thanks for replying. Do you mean that I should use 2 outputs in order to get a stereo sound? That would not have my highest priority. The most important question for me is if I understand the use of the HB load box correctly and if my proposed setup could work well. Unfortunately my amp does not have a slave out.

Hi all, Ive been using my HX Effects in conjunction with my Mesa F30 to good effect. However, I am interested in running direct to FOH, and I was wondering if you guys could comment on my proposed setup: Guitar, HX, send to Amp input, amp speaker out to Harley Benton loadbox (I know, im cheap), then line signal to return/HX, using a good IR, then out to FOH through a DI. Perhaps I could use the speaker output of the loadbox to still use the amp speaker if I want to, but this is secondary. This is the loadbox I would buy for this use: https://m.thomann.de/nl/harley_benton_pa_100_power_attenuator.htm It's basically me really liking my amp but not wanting to use microphones anymore and having a loud amplifier on stage. And its me using the fact that the HX Effects does IR. Would this work? Does the specific loadbox that I linked have the required connections? I am not able to spend any more on this.. Hope you guys can advice my on this! Cheers.

Hi all, Been tinkering around with the snapshots on my HX Effects. I'm trying to set one snapshot to 1/4 delay, one shapshot to 1/8 dotted and one to a fixed 320 ms delay. However, once I change the 1 button on my third snapshot to set a time instead of a subset (1/4, 1/8 etc), my other snapshots also change to a fixed time instead of the values I assigned to them. Am I doing something wrong? If so: please explain to me how I should do it.

Hey all, Just got my HX Effects and I think I got most of it figured out, exept the snapshots. My question is: do I have 4 snapshots stored alongside a single preset, or do I have just 4 snapshots for the entire unit? In other words: if I go from my current preset to the snapshot-mode, will there be different snapshots there if I come from a different preset? Thanks in advance