Vics53

Success! Installed 2.50 edit and firmware without a hitch with my new laptop! I really like the new features with the cabs. Like how you can see the mics and how you can place them. That's pretty cool. Prior to 2.50 I really stuggled to get a decent Marshall sound but I'm having luck with the 2203 model. Made a few copies of that and I'm trying different cabs including some IR's I have to get (for me) the best sound. Still tweaking but getting there.

My new laptop just arrived yesterday! My son is getting it all setup for me. In time I will get around with trying to intall the new 2.5 updates. I'm always nervous about these updates. With all previous updates I have never had a problem. Everything went smooth as silk. So it's a bit unsettling when I read here about others having big problems when trying to install the lastest updates. Makes me ask "do I really want to chance this?"

Are you using the stock cabs or an IR? Reason I'm asking is because I am using IR's. For some reason (and not always) when I'm copying and pasting a preset into a new preset location, the high end on the IR cab will be like you set it to zero. No treble at all. Like someone put 10 blankets over the speaker. But then the other day (and without making a copy) I went to one of my presets and there was no treble. So I just re-adjusted to high level on the IR cab back to where I had it, saved it and all was fine. Don't know if this has been of any help to you, but you're not alone. I have no idea in either circumstance why this happens but it's been an easy fix.

I believe I figured out the problem. My laptop is too old. It has Windows 8.1 and the requirements for the 2.5 upgrade are Windows 10 or 11. Time for a new laptop. I've been thinking about it anyway. Thanks anyways.

Sorry....when I said my attempts have been through the Pod Go itself....what I meant to say was: I have the Pod Go hooked up to my laptop with the provided cable and I'm trying to do the updates through Pod Go edit on my laptop just as I have in the past.

Thanks for replying. No, I have not tried updating from this site. My attempts at updating have been through the Pod Go itself. I'll try that later on today. (Just got up and the coffee hasn't kicked in yet!).

According to a tutorial I'm watching on YouTube, once I sign in to my account through the PodGo Edit Software a window is supposed to appear letting me know that a new Firmware update is available. Nothing. Tried resiging in a few times and still nothing. No window to start the update proceedure appears. Now, in green letters at the bottom of the PodGo Edit screen it says "Updates Available" so I thought I'd try that. A window does appear but it says"the following updates are available for" PodGo Edit 2.0 and for Pod Go Firmware 2.1. Again, I'm trying to load Edit and Firmware for 2.5. Never had an issue before. What's wrong?

Thank you Voxman! Looks promising. Wonder if those can be purchased here in the USA?

Thanks for the suggestion! I just sent them an email.

Does anyone know of a suitable power adapter that will work with a Pod Go other than the DC-3H adapter that comes with the unit? I've got a new one on order but according to Sweetwater they may not be in until sometime in late October. The Line 6 store even shows this adapter as out of stock. I even called some local music stores. Nope. The thin, outer insulation that leads into the small barrel-like portion of the adapter has frayed leaving the copper wiring exposed. Some of the wires have broken so this adapter is on limited borrowed time. If I bend and press the wires together just so, I can get it to work. But as soon as I move it with the slightest touch it looses its connection. I've been looking but offhand I can't seem to find an adapter that will safely work with my Pod Go. Hoping someone here might know of something I can use until a new one arrives. I'm supposed to play at church on the 24th of this month. I'd sure hate to be up there and my signal goes out! So yeah, there's a bit of urgency here! Input Voltage Range: 100-240V AC, 50-60 Hz Output Voltage: 9V DC Output Amps: 3000 mA Polarity: Sleeve: Positive, Tip/Center: Negative Connectivity: 3mm x 5mm Barrel Thanks in advance for any help. Have a good day.

Okay, Line 6 tech support got back with me the the other day. They suggested that I back up my preset,s do a factory reset then download the latest 1.4 firmware. I am going to do this but not until next week. Reason being is because I'm playing at church this coming Sunday and I do NOT want to take a chance of things potentially going wrong before then. (That would not be good!). We had rehearsal on Wednesday of this week, all was working fine and I want to keep it that way for now. I haven't had any issues with past firmware updates so I'm hoping things will go as smoothly as they did before. I have done a few edits within the presets I'm using and that went fine with no problems. But I haven't tried copying and pasting anything else because that's when things went screwy. I let tech support know of the mentioned plan and they said they will keep the ticket open for two weeks. So come this Monday or Tuesday we'll see what happens.

Thanks for the suggestions although #5 seems a bit extreame!!! 1) If you restart Go after import does it change anything? Things have been fine up until about a month ago. 2) If you export both identical patches and compare them using winmerge or other file comparison program, any difference? Sorry, I am not at all familiar with those programs. Sounds worth looking into though. I will say that I have not installed the most recent firmware. I've had no problem with past firmware updates but then I always waited a bit because it seemed like there were a lot of bugs that needed to be corrected. I'm actually pretty happy with the presets I created and didn't want to take the chance of turning my Pod Go into brick, which has happened to some users. But for all I know maybe the latest firmware will help with the problems I'm having as of lately. But I did fill out a support ticket last night. We'll see what response I get. Thanks again. Have a good day!

This is really strange. Yesterday I copied preset 21B into 24A. Had to up the overall volume on 24A to +11.4 in order to match 21B. Anytime I copied and pasted in the past I've never had this problem. Today I copied the Teemahl pedal from 21A into 24B. All settings on the amp model, cabinet and Teemahl are identical in both presets. But the Teemahl in 24A doesn't sound like it does in 21B. It sounds more like an extreame clean boost. Tried a few other pedal models and got the same effect. No overdrive or distortion, just and intense overall volume boost. Makes no sense. Anybody?

Greetings. I've had my Pod Go for about two years with no problems.....until recently. Had a preset I created last night that came out pretty good. Today I copied and pasted it into another preset bank to make some changes. Gave it a listen and for starters the overall volume way about 1/2 of what it originally was. (I work in Snapshot mode). I set things up as follows. Snapshot 1: Bridge pickup. Snapshot 2: Middle position. Snapshot 3: Neck pickup. Snapshot 4: Ambient sounds. (I like to get a nice, even balance between the pickups). Not only was the whole overall volume about 1/2 lower, but all of the snapshots didn't sound anything like how I set them. Tonally, all 4 snapshots sounded the same. Went back to check the original preset that I made and my heart sank because it now sounds like the copy does. Half the volume and all 4 snapshots sounded the same. I have the Teemahl pedal included and when I tried out both the original preset and the copy, the volume of the Teemal increased dramtically and didn't sound anything as how I originally set it. Things started getting odd about a month ago. At that time I called up another preset I made and couldn't believe how overlly bassey it sounded only to find the bass was on 10. I never, ever have the bass up that high. This actually happened a few times. Things are changing on their own. Anytime I make a change to a preset I automatically save the change. Standard procedure. So I don't know what is going on here. Seems like it's developed a mind of its own. Any help would be truly appreciated. Thanks for your time.

I don't get it. Now it's working fine and I am able to see snapshots 1 through 4 within a preset on the Pod Go's screen where as yesterday I couldn't. Yesterday I tried pressing the Mode switch to see preset footswitch mode. Then I tried pressing both the up and down switches together to see the 4 snapshots within a preset. No dice yesterday, now it works fine. Still wish I knew what happened so I would know how to correct it if it happens again.

I don't know what happened. Got practice at church tonight and I spent the day setting my sounds up in Snapshot mode as I've been doing for months now. Had no problem today. Per the Pod Go's screen display I am in Snapshot mode. For an example, let's take one song I have in preset 22D. I set up a clean sound in Snapshot 1, there's a semi crunch sound in Snapshot 2 and a heavier crunch sound in Snapshot 3. Set it up with no problem. But when I go to the Mode switch so I can view Snapshots 1 through 4, what's displayed as if I were in Stomp mode. I can change from one Snapshot to the next on the Pod Go Edit on my laptop but not on the Pod Go itself. I turned the Pod Go off and closed the Edit program thinking it might be a glitch. Turned it back on and nothing has changed. Everything was fine earlier because I ran through all the songs with all of their Snapshots with no problem. Grabbed a bite to eat, came back to it with the problem. Any help would be much appreciated.

I've had my Pod Go for a little over a year now and I am really enjoying it. I've been lucky in that I haven't had any problems with the initial downloads and with the last firmware update. My only "gig" is playing at church and I use it whenever I play guitar or bass. In terms of portability it's been a life saver especially on my back and knees. It's amazing to think that all of my amps, cabinets and effects can fit in a suitcase! It took a while to dial the sounds in. Meaning, I got some great tones at home through the Sony Studio Monitor headphones ((MDR 7506) but due to the acoustics of the church it was very different and I really had to work with the soundman to make these sounds presentable. Regardless of the tones being clean or overdriven, at church they came out lacking a lot of bass and had too much treble. So basically I had to go to the global EQ to add a lot of bass and had to decrease the treble. So when I'm now setting the tones up at home they don't sound very lively but at church it comes through pretty good. I played guitar there this past Sunday and one of the other musicians out in the congregation told me "your tones were killing it!" So I guess the end justifies the means. But of what I gather they are soon to be putting some sort of sound absorption material up on the walls so maybe that will help with some things. After 10 month with the Pod Go I thought I'd try some amp/IR packs from Worship Tutorials. It was very interesting seeing how they set things up, I learned a lot and I really like the IR's as they made a difference. I know some people here frown on this sort of thing and that's fine. Of course, I had to dial them in to my preference but I really like the results. My favorites so far are the Vox AC30 Fawn model (I used that one at church), the '63 Fender Bassman and the Fender Princeton. I bought a lot of other packs (Marshall, Matchless and others) and I'm slowly getting to those as well. Fun stuff! I can't compare the Pod Go with other units out there and can't say it's the best thing because this is the only unit of this nature that I've tried. But for my needs and wants I'm pretty darned happy with what I'm getting from it.

I use my Pod Go at church directly to the PA (no direct box) using the mentioned adaptor and have never had a problem. Works great!

Oh, you're absolutely correct. "When all else fails read the instructions." My apologies to you for being upset with me and rightfully so. Have a good day sir.

Thanks to my son, I was just now able to download the IR! Good grief! Well, I told you all I'm not a computer person! He pointed out how the patches and the IR were in a compressed zip folder, so he "unzipped" it and it was able to load just fine. I am SUCH a dunce with this stuff! Thank you all for you help.

Well, I tried and tried and no luck with loading the IR. What you (Voxman) suggested is exactly what is shown in a YouTube video on how to load an IR. I mean, its not rocket science. Click on Impulses on the Pod, call up the IR from where its saved on my PC, click on and drag the IR into an available slot in the Impulse section and its done. Not so. As said before, the amp patches loaded just fine. Yes, the IR is a WAV file. But here's what's really odd. Assuming the IR loads you said: " go to the cab model in the preset, click on the 3 dots inside the white circle after the name of whatever cab it loads, and you'll see a normal red cab icon on the left, and a purple cab icon with a squiggly line on it on the right. Click the purple cab icon and on the left will be a list of the IR's you've loaded. Double click on the IR and it will load into the preset. Save the preset and you should be good to go." All 128 Impulse places show empty. But when I did what you said (clicking on the purple cab with the squiggly line on ANY preset in User it now shows it has an IR. It shows IR 1024 whatever that is. But when I click on that it shows it as being empty and again, all 128 Impulse places show empty. So I don't know what the hell is going on here.

The preset and the IR were both purchased together as part of a package from Worship Tutorials. The IR is in its own folder. Double click on that folder and its in there as a WAV file. "60s AC Silver." I can access it just fine. Just can't figure out how to load the IR into the Pod.

I just went back to YouTube and watched a video on how to load IR's. Fellows name is Jason Constatine. As per his video, he opened up the IR section. He then opened the file with the IR, clicked and dragged the IR into an available empty bank. The thing I noticed was as he had the IR over the empty banks they were highlighted and he put the IR into the highlighted bank of his choice. I tried that and nothing is highlighted. Then I get a message that says: Pod Go was unable to import preset in this set due to the following errors. -400- file or direction path not found. Pardon my ignorance, but I'm am NOT a computer person and I don't know quite what this means. I take it there's something else I need to do but can't figure out what.

Greetings! Hope all are doing well. I ordered a Vox AC 30 preset from Worship Tutorials on Friday. Never tried an preset like this before so I thought I'd give it a go and it's pretty cool. I was able to load the preset just fine but I cannot get the IR to load. They said the IR is the real star of this preset so I'm anxious to hear it. I have contacted their support site for help but haven't heard back from them yet. In the meantime, maybe someone can walk me though how to load the IR. Again, first time in attempting this. Also, I've been so happy with my Pod Go that I haven't bothered to do any upgrades to the latest Firmware. The current Firmware is what came on the unit which is 1.120. I watched a video on YouTube on how to do this and it looks pretty easy but it seems like some folks here are having problems when loading the latest versions. Is the latest version 1.130? I think that's what it is. Thanks in advance for your time. Have a good day.

Thanks Voxman. If some folks are having difficulties with upgrading 1.21 I'm going to hold off for a while. Maybe there's some glitches that have to be ironed out and if so I'll wait. As said, it's working great so why tamper with success? But I am considering trying some IR's. Some folks say IR's make a huge difference, others have say it's minimal. Won't know till I try.