DeArmin

@Schmalle Sorry, but the commands as they are issued by MS, in order, are correct (s. attaachments) PC - Pause - CC. PC e.g. 120 (for preset no. 120), then pause e.g. 1 second, then CC Number= 69 + Value= 1 (for snapshot 2). When changing presets, the correct SnapShot would then have to be called. In the example snapshot no. 2 The problem is sometimes when changing presets instead of SnapShot 2, SnapShot 1 is called. In the attachments I choose the Snapshot 1!

What I don't understand is if I make a preset change via PC command and then output the command via CC, e.g. "select snapshot 0" why doesn't it accept the command? This should be independent of whether "Toogle previous" or "Reload" was selected in the Prereference. If I select a preset via footswitch (up/down), then everything works perfectly. I have organized the presets in such a way that snapshot 1 is always called up when changing presets (via footswitch).

Hello, I use MobileSheets (MS) to manage my songs. I connect MS and my HX Stomp XL with a USB cable. Midi commands are issued via the MS. As soon as I call up a new song in MS, the corresponding preset and the SnapShot are selected. The first midi command is the Program Change (PC). Here the preset is selected and the second command is Control Change (CC). For CC, 2 values must be entered. Instructions for the SnapShot "69" (see documentation) and the number (0-3) of the SnapShot to select. 0= SnapShot 1, 1= SnapShot 2 etc. With the default setting in "Global Settings > Preferences" in > Snapshot Reselect - "Reload" everything works fine. If I set >SnapShot to "Toggle Previous" instead of "Reload" >, the right preset is selected, but not always the right "SnapShot". Does anyone have an idea why this could be?

Problem with new firmware 3.71 Hello everyone, today I installed the new firmware 3.71 in my Stomp xl. First I made a backup and then carried out the update. Then a reset and the backup restore were carried out. So far everything worked. Afterwards I tested my presets and found that all my delays no longer worked. I use delays in mono, especially the Adriatic Delay. I had to increase the time setting from 1/4 to 1/16 for all delays. With the previous settings (time 1/4) the delays were terribly scratchy/ like clipping or distortion. I have nothing change after restore my backup. Do any of you have the same problem? Update: I have found out, when the setting for the tempo is in ms, e.g. 330 ms, it works similar as 1/16.