randychesbro

Im using LogicPro on Mac Studio m1 OS Sinoma. and 2.70 Helix Native. As soon as I click the midi learn button the Helix Native goes bye bye.. Can't find any info on it so fare.

Im sure you figured it out by now. Tom got it right. Im going LR to my first sub then L6 to all the others. I know some guys like to have a separate mix for the subs but i haven't had issues enough to use it that way. I did when I first got the system.

I tried the other inputs too and still bad.

I was trying to use my lt3t at a wedding and the high end cut out. I tried to eq it and it would cut back in, back off. I'd like to know if anyone has had something loose in there that could be tightened or is it bad electronics starting to fail?

I tried the zlx for mains and there's no comparison in the sound. I do use them (the zlx12p) for monitors. Had to send one back because of vibration rattling noise. And those are a 1000 watt peak. I'm sure with some good eq and a sub or two it may be just fine for some venues.

Well I finally came back for a question and see I had some questions to answer. Sorry, I'm sure you've figured them out but. It's been almost a year since I've had my stagesource speakers. I have 2 Lt3 with the mixers in them , figured it wasn't much more and if I wanted to do something small I could. I added 2 lt3s subs also. Using them with l6link with my Berhinger X32rack. Still sounding awesome no problems at all no buzzing or rattling noises like others may have. I yet have had the chance to play out where I needed both subs. I hope to hear it together other than during practice. I'd like to know if anyone lets has the same set up with an X32 mixer.

ill have to try it out. not sure it saves me any cabling since i probably should get the data cable for that. thank you!

I wanted to know if going to my first L3s with Left and Right in from my x23rack mixer and then using the L6connector out to the tops and other Sub would work? Normally I use my subs in an AUX ch but I wanted to simplify it a little. Since the 2L3t are pole mounted on the subs Im thinking L/R from mixer to first Sub, then use 1 L6cable to the other Sub then I would only need a 6 foot cable to each top. Question is would it know there is Left and Right since ill use 1 cable to the other side? I hope I explained that ok.

I hooked up my speakers for the first time wednesday.....hmmm what to say about them?...... Holy Cow!!! Im using them with my Behringer x32 Rack in a small room 15x12 where we practice. I ended not having to EQ the room like i did with the other speakers i had. I was able to flatten out the eq for the mics too. I was able to get much louder before feedback than before, this is awesome ! I did end up EQing a little because i wanted to see what levels i could get in there. My james tylor guitar and Hd500 sounded really nice too. I originally purchased 1 of the L3t for my guitar but since i wanted a new sound system i just added another and go Direct to the X32 with myHD500. works great sounds great! wish I had enough money for the L3s. Im just using a peavey 300watt 18"sub for now. anyways hope I don't endup with any of the rattling some are getting , so far so good.. Randall

never mind, I just checked it out and the answer is no. I was hoping it was an eq thing for the guitar and not a total crossover thing effecting the other inputs.. would have been neat!

Im wondering if i was to use my HD500 with the L3t using the L6link in guitar mode and added an Mic or line to the built in mixer will it have the same EQ as the guitar setting or the full range. Can you do both. i hope i explained that ok.

thats probably what ill do.. It is what iv been doing with my older non powered speakers, again Im sure ill be happy with the L3t its just i was told one thing and it wasn't correct. Oh well. I need to get 1 more still. :) thanks, Randyc

Maybe I wasn't waiting long enough. I guess i figured it would recognize it like USB, plug it in and it see it. Another Question. If i go into the L3t inputs It sounds like I plugged into a sound board directly with all the high end nasty grit. is there a setting I need to change? thanks

I guess I could do that. I normally would use an AUX ch to the sub so I can send what i want to it. Thanks for coming up with other solutions.

Im having a little trouble with having the L3t connect to my HD500 using the L6Link. I did go purchase a data/dmx cable for it today but ended up with the same issue as when using a good mic cable.. Is there a step by step process I need to do to have it connect every time? it seems random. If i turn off the HD500 to reset it and back on it doesn't connect to the L3t I reed turning them off and on but no go. If i leave it off for a bit and then on it connects. I worried that if I'm out giving and the power goes off or whatever happens then I can start back up and running quickly. anyways if there is a process I need to do to have them connect every time please let me know. side note. If I go xlr out of my Hd500 can i go to the line input at the top where the rca inputs are? I know it works but its way lower volume. am I not supposed to do that? thanks

They as I referred to is the person at Line 6 that I called to ask the question.. I know enough about cross overs and bandpass filters to use them.. not really reinventing it was me looking at the EV speakers that have the option in their DSP to tell it there is a Sub attached and it will adjust the "crossover /bandfilters" whatever its doing to work with it. that is why I talked to LINE 6 before I purchased them. So now that I know it is Not possible (although I bet they could add something into the firmware to give the ability to do what I described.) I will just have to you the filters that are in my X32rack. its not the end of the world, I'm just saying I wish I had the right information because pushing a few buttons is fairly easy than setting up filters and crossovers. my sun only has 1 input and a pass through. If Im putting a Bass drum in the mains I though that might be pushing it a bit that why id like to filter out some low end. thanks.

I have a peavey 118 powered . I believe it crosses over at 120htz and it probably has a passthrough but I'm not going to do that to just one side. I realize there are things i can di to make it work. I'm just a bit disappointed they would not have something built in these L3t/m as i was told. I'm sure it was a misunderstanding. Ill end up having to do it all with EQ and filters with my Behringer x32rack

I have 1 sub NOT Line 6. when I called about the L3t I was told there was adjustable crossover point so i when with that instead of getting 2 EV ZLX 15p which for me sounded pretty good and they have a nice DSP in them with the ability to tell it that there is a sub connected and where to cross it over.. I get how to hook them up.

I here you, But I guess I assumed since I asked them if the speakers had an adjustable crossover point built in that it would have one in it as do many speakers now with built in DSPs. Originally I was looking at the EV ZLX speakers that do have that feature. But With the information I was given I went with Line 6. they can't expect everyone to use there Subs so leaving out that feature?? i don't get it. I do love all my Line 6 equipment but now its not about simplifying its about adding another piece to make it work right. argh!

Thats not what I mean. There are 3 crossover point for when you are connecting a Sub to your system like 80 100 and 120. that way you mains arnt putting out the low end also. But, I don't see any buttons that would let me adjust that on the L3t. thanks though.

Before I purchased my L3t I asked about changing crossover point and they said it could be done. BUT I see now that its all done on the line 6 SUB and not the l3t. So my question is how do i change the cross over in the L3t when using a different sub? Originally I was going to get the EV ZLX speakers, they have the crossover option in there built in dsp. ARGH! Im also trying to hook up my HD500 with l6link to the l3t and it does nothing. I have tried a few different cables but nothing. Any Ideas? thanks for any help,

Thank you, do you make your own amps?

I was wondering who made the amps was it Line 6 or someplace like Crown or??? Do we know who makes the speakers or are they line6 only? also I see they are rated at peak power I was told they were 1000watt continuos 1400peak do you know if thats true? Can we change the crossover point when we use a sub or is it set at its own point? thanks...