flipotto

+1

I use cd/mp3 input and like it.

I'm doing that, I use cd/mp3 input instead.

I have two line6 products, that I like quite a bit. HD500 and X3Live. I record my band in my studio with a presonus studio live 16.0.2 and 3 firestudio's (46 tracks if I count the spdif) all working happy together. Here is the problem. I want to use spdif out from both hd500 and X3Live at the same time. According to instructions, I should make the hd500 or/and the X3 master clock... While I understand the reason for this, I don't know how I can do both at the same time? Secondly - I don't want to clock all that input on those 4 firewire devices on something on the floor in front of me, which I could kick the power cord or someone else could. I play bass through the X3 and my bandmate plays through the hd500. I really want to use spdif, however, without sync word clock, I hear pops and clicks periodically. Sometimes, I have to restart the system completly. So - I really want this to work because, my guitar player often switches patches - that aren't so good during a song... I need to record a dry signal from the hd500 as well as amped. Seems like this should work, however, I am worried it won't. BTW - we don't use any amps in the studio, all direct in and headphone monitoring, works nice... Advice appreciated.

Hey, I am reading your post and about to do it, however, I have a question "Solder 2 pcs of 4,7nF film cap across the In- and the Output pins ( bottomview right and middle) on both of the stacked stereo Mastervolume Pot (B 10k)" A)Do you mean I need to caps? Solder one to the bottom pot and the other to the top pot? The stereo pot inside legs are very difficult to solder to? B) Do you mean solder 1 cap across in/out on the pot that is easy to solder to? The outside legs? C) Do you mean solder 1 cap to both inside legs and outside legs. Any help you can give... please. email genmce(at)yahoo