Imaginario77

Hello! Anyone out there using HX Effects with Tech21 Trademark 60? I recently got the Hx fx. Wonderful gear. Full of great features. Used some pods before. Recently Pod Hd500x. But the Helix family seems to take it a step further. I got the HX Effects to try to make the most of it and its features. I use the loops, loop 1 to insert some pedals (mainly distortions) and loop 2 to make the 4 Cable Method (4CM). I have an expression pedal on input 1 and was trying to control my amp functions with the Ext Amp 2. So far I was able to change channel but I can't access any other functions on my amp. Can't control Boost/Reverb function neither Fx loop on/off. The only thing I can think about is that this happens because my Trademark amp usually uses a standard (mono, Tip/sleeve) cable to connect to its original footswitch and I think the Hx Fx is supposed to use a TRS jack cable. I've tried both with the same result. I can only switch between amp channels. While reading the manual trying to solve this I came across something that worried me because I really don't know what it means: "IMPORTANT! Connect EXT AMP 1/2 only to amplifiers that utilize "shortto-sleeve" footswitch inputs. Connecting to any other sort of input could cause permanent damage to both your amp and the HX Effects device! If you're not sure if your amp has short-to-sleeve inputs, contact the manufacturer." I don't know what "short-to-sleeve" means... and if this amp applies or not. Could this be the problem? Am I in risk of damaging my gear? Anyone can think of something that might help me? Thank you so much! Keep rocking and rolling!

Hi. I'm using my Pod hd 500x though a trademark 60. I use the 4 cable method. Guitar -> Pod guitar input - Pod send -> trademark input - trademark send-> Pod return - Pod out -> trademark return. Everything sounds great... really good... except the distortion and amp models. they sound very poor, lack body and lots of mid frequencies. The rest is OK. Anyone has experienced something of this kind? I rarely ever use them, and that's a shame. What I usually end up doing is having a hot rod plexi from tech21 just before the input of the trademark. Pod send-> plexi-> trademark input Any suggestions? Thank you so much. P.S. - I noticed that noise too when USB cable is connected to PC...

Hi. I'm using my Pod hd 500x though a trademark 60. I use the 4 cable method. Guitar -> Pod guitar input - Pod send -> trademark input - trademark send-> Pod return - Pod out -> trademark return. Everything sounds great... really good... except the distortion and amp models. they sound very poor, lack body and lots of mid frequencies. The rest is great. Anyone has experienced something of this kind? I rarely ever use them, and that's a shame. What I usually en up doing is having a hot rod plexi from tech21 just before the input of the trademark. Pod send-> plexi-> trademark input Any suggestions? Thank you so much.