I've had my HX Effects for about a week, and understand that it can output to 2 amps using the 7 cable method. What I'm not seeing specifically in the manual is whether those 2 amps can be alternated, such that Presets can be programmed to route to one amp or the other, but not both. Put another way, I know that the HX Effects' outputs in 7cm would route into the effects loop returns of the 2 amps, but how do I program a Preset to send only to Output 1 or only to Output 2? Am I right that the only way to do this would be to pan Presets going to amp 1 all the way to one side and Presets going to amp 2 all the way to the other? I wouldn't be able to use effects in stereo, but I don't mind. I can also loop the HX Effects into my ES-8, and run the HX Effects with midi from the ES-8, but I thought the HX Effects would essentially make the ES-8 obsolete. Keeping the ES-8 in my rig solely for this purpose would be overkill, not to mention that I wouldn't be able to fully use the HX Effects as I'd hoped due to this one issue. Thanks for your help!