zubala

Tried to update from 2.31 to 2.32 today. I got the 80007211 error. So I guess that the problem isn´t solved at all. I doubt that it has something to do with my Pod Hd Pro cause it worded flawlessly for 3 years. Any suggestions?

You can control wah and volume. You have to find out the midi cc that the wah and the volume are controlled witch. The trick is to program your FCB to work properly with your POD HD Pro. I did this over a year ago and it works fine up today. Connect your POD HD PRO and your FCB. Switch both units on. Press the down button on your FCB for more than 3 seconds. (after that 1, 8, 9 flash up) Push button 8. it starts to blink. Press up button. A number flashes up on the screen right above the up button. push button 1 on your FCB to change this number to 01 Push up button again. A second number occurs push button 1 again, so that these number also shows 01 in the display. (the little green light under preset configuration should light above "value1") pish "up" button again. push buttons 1, 2, 7. Now the display shows 127. push up button again. Congratulation, you have programmed Pedal A (the left one) Let´s program Pedal B for volume: Push button 9. it starts to blink. Press up button. A number flashes up on the screen right above the up button. push button 2 on your FCB to change this number to 02 Push up button again. A second number occurs. Change it to 00 push up button again. A second number lights up. push buttons 1, 2, 7. Now the display shows 127. push up button again. Congratulation, you have programmed Pedal B (the right one) Push down button for more than 3 seconds to leave the programming menu OK. The FCB is programmed. Let´s go to the POD HD PRO Choose a wah pedal as a single effect in the chain. Make a double-click on the "move" button on your POD. The "Controller Assign" Menu pops up. with turning knob no. 2 choose EXP 1 Turning knob 3 0% Turning Knob 4 100% Save everything. Congrats, your wah works now! Volume Pedal place the cursor over your amp model block double click "move" "parameter" turn turning knob 1 until parameter shows "volume" Turn turning knob 2 until it shows EXP 2 choose min (I suggest 0%) and max level to your desire Save Congratulations! Your POD HD PRO has a channel with foot-controllable wah and volume. You just have to program the FCB once. Every POD channel has to be configured on its own. Thats a bit of work to do but it gives you total freedom to control whatever you want. Hope that could help. It works. I play this combination for a long time now - great value for the money if you understand to program it right. HAVE FUN!