ChadWitwer

So I think then what you need to do is tap what you want on a given preset, then save that preset.

Under Global Settings you can choose whether the tap tempo recalled per snapshot, per preset, or globally across all presets and snapshots. You should also be able to adjust this by briefly touching the tap tempo switch which will bring up it's parameters.

I have an on going issue that I can't seem to figure out that I've been trying to figure out for months. When running my Strymon BigSky and Timeline either in a loop or if I try to run in stereo by using the left and right outputs on the HX Effects I get digital clipping. When running them in the loop I've had to adjust the Send volume down by around -16db to eliminate the clipping, then I max the Boost on the BigSky (+3db) and then max in Return volume on the HX Effect out just to try and get close to the original volume (I think the max is +6db if I remember correctly). Then when I try to tun the Strymon pedals in stereo by using both outs on the HX Effects since there is no volume adjustments for the outs I found that if I use the low pass filer on the BigSky that helps clean up the issue. All this brings up several questions. Is this normal? Am I doing something wrong? Is there maybe something wrong with my HX Effects? What I really want to do is run a true stereo set up where I run out to the front of 2 clean amps but I don't want to loose signal volume or integrity, which might make using a loop an issue because I don't think you can use a single loop in stereo and I have my drives on the first loop so I can use a noise gate and compressor in front of them on the HX.