Guido_59

@PierM The airflow of fan is directed to the bottom of Stomp ?

Do you suggest to ventilate side where is located power CC input?

Hello rd2rk , I suppose from Italy I see what you mean. On a Facebook Italian group , probably you know it, one user say his vendor call to advice that Line6 sends him a mail about this . In this mail Line6 should be talk about control on Hx stomp and stomp xl for this issue , but no one has read this mail with me with list of device serial number interested by issue. I have many doubt this is true, but I decide to ask in this official international community for news

Hello I’m Guido from Italy Have never ear something about Line6 controll on Hx Stomp and Stomp XL for possibility of chip breaking cause overheating especially after upgrade with last firmware on a certain range of serial numbers on warranty and consequent warranty extension? This is an alert give to a friend from his shop , but I haven’t read nothing about. Line6 make control on a lot and send advice to shop or distributors without publishing nothing about on official website? I think this is not possible, Line6 is a serious manufacturer and in case of problem on a product should be an official communication on official website Have you notice about ? What do you think about ?

Hello I’m Guido from Italy . I use Helix floor as audio interface on windows 10 pc , next time go to Mac, and works fine with DAW Cubase elements and Reaper. I have a problem with Band-in-box software that I use to compose simple backing track. Audio signal from this program is inaudible it doesn’t go through Helix so I don’t ear any sound from this software . In windows audio setting all seems ok , but in windows mixer I don’t see any signal. Probably is a problem of setting and maybe of midi setting , but I am not an expert and I can’t be able to found the right setting. Can you help me ? Thanks in advance Bye from Italy

Hello from Italy I have Helix floor recently buy A simple question does exist a list of min and Max delay time for each tipe of delay or only way is reading inside parameter of each delay type? Thanks in advance

Thanks all for your suggest I have removed bit defender and run only Windows defender . Very interesting daw optimization page Thanks and bye from Italy

Hello I’m Guido from Italy I have a simple question. What Antivirus/Internet Security suite do you use that has lowest impact in performance usino audio with Helix as audio interface? No drop, sound artifacts, gitter, latency problem, ecc…. Please tell what you use and if on Windows or Mac and if your pc/Mac is recent or older Thanks in avance Guido

Upgrade !!! I'm happy, I found final setting and it wors geat and record any audio streaming included youtube that is important for me In attachment you see Audacity setting while windows setting is with Hx Stomp as Playback and Recording device Hope this should be helpful fo other BYE

Damn !!! I don't know why corrector write Aldo , excuse me was a mistake. Now I understand setting , in week end I try sure. Thanks

Thanks DunedinDragon. You sai right , but I always do this. I always record streaming audio with the various audio interfacce I own, from on board , to external usb: Line6 UX2, Scarlett 2i2, RME Baby-face pro and with Helix LT. Few month ago I sold Helix LT and taken Hx stomp , but I’have never try to record streaming audio . I only must found right setting ,at least I hope

Hello PierM Man you are Italian too ! Very happy to Meet you hehe, Thanks for suggest . I have doubt cause looper doesn’t have a adjustable delay time inside to trim and simulate 2 tape recorder delay. I’ll dry what you suggest . I think to try various delay , first tape echo o Binson emulator, depends its delay time. Delay feedback setting is better setting to high % over 50 or it depends from desired result ? I hai think to use sene return Block and its physical connection to reconnect out of a delay to its input, as I ask in otterrai thread, but this maybenit’s a too crazy idea and maybe it’s not possibile . Are you Aldo on FB group or italian forum ? Bye , Thanks you and tilt you next time.

Hello from Italy. I like effect like Robert Fripp and his Frippertronic. I haven’t found much info about how to on Hx Stomp. Here only this thread but is for Pod Go and there’s no link to any preset. can you give me some suggest? With Looper block is possible? Should be a madness using send return for return signal out from a one ( or many delay) to its input connecting related fisica in/out to make a looper? Like this Frippertronic schematic Thanks in advance for your help and have a good music!

Hello guys from Italy. First excuse me for my English. I can’t record any streaming audio from YouTube, web browser, SoundCloud, any player. From the same source I playing and listen audio without any problem. Hx stom is correctly recognised windows 10 and from app like Cubase LE, Reaper, Audacity, Foobar ecc I have also Bitdefender installer. Setting on Hx stomp seems ok and are the same that I Had on Helix LT. On Audacity for example, I have set Asio and HX STOMP as play and recording device. Can you help me? Thanks in advance and have a good music !

Thanks lou-cash! I play blues me too, anf aoustic jazz, so I'm oriented to Seymour Duncan Mag mic. Have you tried this pick-up?

Hello I have bought an acoustic guitar after long time Epiphone EL-00 pro with has a Fishman Sonitone +sonicore , but I want change it with Seymou Duncan Mag Mic magnetic +condenser. To create good preset for a good sound have you some suggest? Don’ exist an acoustic amp, so what you use ? Do you use acoustic ir like 3sigma? thanks in advance?

I ask to Line6 support for my license for Native for LT this is answer When you sell the Helix LT you can keep the Helix Native license and continue using it. However, the new owner won't be able to purchase the discounted version anymore as it's only valid once. If you don't want to keep Helix Native you could also "gift" it to another Line 6 account. This is described in the following article ("How do I gift a store order?"): https://line6.com/support/page/kb/general-faq/line-6-license-manager-faq-r21/

Hello from Italy. A simple and probably stupid question. For 3.12 version exist a list of factory preset ? It should be useful in general but especially to discriminate guitar and bass preset. I know I can read list on Helix Native and capture the screen but this is not handy. Can you help me ?

Hello from Italy. Anyone has experience with fuzz of Bass amp Woody made on old Acoustic 360 with a dedicated built-in fuzz? Jaco Pastorius sometimes had played with it.

Thanks reason of my questione is that I use Helix LT online for elettric guitar tilt now. I’ll look preset on Custom tone and YouTube tutorial as starting point.

Hello from Italy. What are the preset/preset for electric bass? Where can I found good sounding preset for jazz, fusion, rock,blues? Thanks in advance.

@ hurghanico Wow I’m living in Anzola dell’ Emilia ! I have some difficulties to understand a complex discussion in Emglish . I’ll do me best . @codamedia I haven’t seen that page , it’s vero interesting. I’ll read it with great attention and try to set at best Grammatico LaGrange that is The most similar to tweed delude 5e3 like Neil Young, etc.

Thanks to all for very useful informations. I'll read all suggests with great attention cause my English unfortunately is not so good.Excuse for my language I write from Italy! With real amp I have own in the past, I I have always set all tone control to max, because there was passive to have the real voice of Amp. Then by guitar tone control I did make tone brighter or darker.

Simple question tone control of various amp model are passive and are neutral set on max, then are substantially subtractive? I notice that some model has different tone control than real amp. Example Small tweed , refer to Tweed deluxe 57 or 59?, has separated bass mud treeble instead of simple tone control of real amp.

Hello guys. Problem solved. Cause mistake I have loaded impulse at. 96khz from Red Wirez, so DSP conversion capability to 48khz was probably too low. So I have loaded an original 48khz impulse as 1024 and by this way I was able to load 2 impulse at 2048 or 4 at 1024. Thanks all of you.