Search the Community
Showing results for tags 'limit'.
Hello, I have an l2t speaker being driven with my Pod HD500x using a single 1/4" cable from the unbalanced output and into the line input of the l2t. I'm using the 'line' setting on the HD500x. I've been using it now in my band for about 4 months and never had a problem before last night. We typically play fairly loud during practice (seems like I have to really crank it to hear over the drummer). To give you an idea how loud, the master level is typically set at around 1 o'clock and the master output on the HD500x is around 2 o'clock. The modeled 'patch' amps for the HD500x are typically around 75% cranked. So the story is last night after about 1 1/2 hours of playing, it just cuts out and stops playing anything. I waited for a few minutes and it started making sounds again, then seemed to be playing fine for about a minute -- then stops playing anything again. The 2nd time when it started to come back to life, it was very faint -- like it was struggling to do anything. The speaker was facing me so I couldn't see it the master 'limit' light was coming on. I'm assuming if I was overdriving it, the limiter would simply clip the sound which isn't what happened - -it simply stop playing anything although the light in the front was on. Therefore, did I overheat it and it shuts down for safety? If that's the case, do I simply need more power? -- i.e., do I need TWO l2t's or say one l3t? Thank you
Hi, I bought a brand-new L2T, unpacked it tonight and off course testing. But it starts limiting with a red light after approx. 20-30 seconds. No matter which input I use or which instrument. I tried an acoustic guitar on channel 1, gain half way, master volume of L2T half way, limit starts and doesn't stop anymore, no sound is comming out of the speaker. Only the noise of the fan. Tried 2nd. channel with a mic., same story. Tried the red/white RCA at the back with an electronic drumkit, same story. The fan starts and there's no sound anymore. Tried the noise suppressing on/off. Am I overlooking something or is this one from the mondaymorning-production batch? Oh boy oh boy.