FarleyUK Posted November 14, 2014 Share Posted November 14, 2014 Hi all, Had my G50 about a year and a half now, and no issues until today.... The receiver lived on my pedalboard, powered via the current doubler cable on outputs 5 and 6 of a Voodoo Labs Pedal Power 2 Plus. However, I moved a few things around, and ran out of outputs on the power brick, so wanted to use the adapter for the G50. When I plug it in, no lights come on. I've tried it with a couple of others, and no power. I then re-tried it via my old method (ie. current doubler cable), and it powers up but there's a VERY loud hum and buzz coming from it. Does anyone have any ideas? Has anyone experienced this before? Quote Link to comment Share on other sites More sharing options...
sdevino Posted November 20, 2014 Share Posted November 20, 2014 I would have that checked by service. Outputs 5 and 6 on the VooDoo Labs supply are AC meant for Line 6 DL4 etc. The G50 and most other Line 6 pedals run on DC. The regulator in the G50 might have been working pretty hard getting the DC it needed. It might be damaged at this point. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.